[PATCH v3 15/16] arm64: dts: msm8916: Add camera thermal zone

[Amit Kucheria]

Initialise the camera thermal zone to export temperature to userspace.

Signed-off-by: Amit Kucheria <amit.kuche...@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi 
b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 62f079ae9ba3..3dc8b8aa76c7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -257,6 +257,27 @@
                        };
                };
 
+               camera-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens 1>;
+
+                       trips {
+                               cam_alert: trip0 {
+                                       temperature = <75000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+                               cam_crit: trip1 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                       };
+
+               };
+
        };
 
        cpu_opp_table: cpu_opp_table {
-- 
2.17.1