On Wed, Aug 29, 2018 at 11:04:08AM +0800, Jisheng Zhang wrote:
> When programming inbound/outbound atu, we call usleep_range() after
> each checking PCIE_ATU_ENABLE bit. Unfortunately, the atu programming
> can be called in atomic context:
>
> inbound atu programming could be called through
> pci_epc_write_header()
> =>dw_pcie_ep_write_header()
> =>dw_pcie_prog_inbound_atu()
>
> outbound atu programming could be called through
> pci_bus_read_config_dword()
> =>dw_pcie_rd_conf()
> =>dw_pcie_prog_outbound_atu()
>
> Fix this issue by calling mdelay() instead.
>
> Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support")
> Fixes: d8bbeb39fbf3 ("PCI: designware: Wait for iATU enable")
> Signed-off-by: Jisheng Zhang <jisheng.zh...@synaptics.com>
> Acked-by: Gustavo Pimentel <gustavo.pimen...@synopsys.com>
> ---
Applied to pci/controller-fixes aiming at one of the upcoming -rc*.
Thanks,
Lorenzo
> since v2:
> - Add Fixes tag
> - Add Gustavo's Ack
>
> since v1:
> - use mdelay() instead of udelay() to avoid __bad_udelay()
>
> drivers/pci/controller/dwc/pcie-designware.c | 8 ++++----
> drivers/pci/controller/dwc/pcie-designware.h | 3 +--
> 2 files changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> b/drivers/pci/controller/dwc/pcie-designware.c
> index 778c4f76a884..2153956a0b20 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -135,7 +135,7 @@ static void dw_pcie_prog_outbound_atu_unroll(struct
> dw_pcie *pci, int index,
> if (val & PCIE_ATU_ENABLE)
> return;
>
> - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> + mdelay(LINK_WAIT_IATU);
> }
> dev_err(pci->dev, "Outbound iATU is not being enabled\n");
> }
> @@ -178,7 +178,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int
> index, int type,
> if (val & PCIE_ATU_ENABLE)
> return;
>
> - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> + mdelay(LINK_WAIT_IATU);
> }
> dev_err(pci->dev, "Outbound iATU is not being enabled\n");
> }
> @@ -236,7 +236,7 @@ static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie
> *pci, int index,
> if (val & PCIE_ATU_ENABLE)
> return 0;
>
> - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> + mdelay(LINK_WAIT_IATU);
> }
> dev_err(pci->dev, "Inbound iATU is not being enabled\n");
>
> @@ -282,7 +282,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int
> index, int bar,
> if (val & PCIE_ATU_ENABLE)
> return 0;
>
> - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> + mdelay(LINK_WAIT_IATU);
> }
> dev_err(pci->dev, "Inbound iATU is not being enabled\n");
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> b/drivers/pci/controller/dwc/pcie-designware.h
> index 96126fd8403c..9f1a5e399b70 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -26,8 +26,7 @@
>
> /* Parameters for the waiting for iATU enabled routine */
> #define LINK_WAIT_MAX_IATU_RETRIES 5
> -#define LINK_WAIT_IATU_MIN 9000
> -#define LINK_WAIT_IATU_MAX 10000
> +#define LINK_WAIT_IATU 9
>
> /* Synopsys-specific PCIe configuration registers */
> #define PCIE_PORT_LINK_CONTROL 0x710
> --
> 2.18.0
>
