Add documentation for xilinx-ams driver. This contains information about various voltages and temperatures on PS (Processing System), PL (Programmable Logic) and AMS Control Block.
Signed-off-by: Manish Narani <[email protected]> --- .../ABI/testing/sysfs-bus-iio-adc-xilinx-ams | 246 +++++++++++++++++++++ 1 file changed, 246 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-xilinx-ams diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-xilinx-ams b/Documentation/ABI/testing/sysfs-bus-iio-adc-xilinx-ams new file mode 100644 index 0000000..589c389 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-xilinx-ams @@ -0,0 +1,246 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccpsintlp +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) LPD (Low Power Domain) + power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccpsintfp +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) FPD (Full Power Domain) + power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccpsaux +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) Auxiliary power + supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccpsddr +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) I/O bank 504 (DDR + PHY) power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccpsio3 +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) I/O bank 503 + (boot, config, JTAG, SRST, POR) power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccpsio0 +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) I/O bank 500 + (MIO[0:25]) power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccpsio1 +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) I/O bank 501 + (MIO[26:51]) power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccpsio2 +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) I/O bank 502 + (MIO[52:77]) power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_psmgtravcc +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) GTR SerDes I/O + power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_psmgtravtt +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) GTR SerDes + terminators power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccams +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PS (Processing System) SYSMON ADC circuitry + power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccint +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PL (Programmable Logic) internal power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccvrefp +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PL (Programmable Logic) ADC positive V + reference power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccvrefn +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PL (Programmable Logic) ADC negative V + reference power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccplintlp +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PL (Programmable Logic) LPD (Low Power Domain) + power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccplintfp +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PL (Programmable Logic) FPD (Full Power + Domain) power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccplaux +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PL (Programmable Logic) Auxiliary power + supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccvpvn +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PL (Programmable Logic) Analog Input Pins + power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vuserZ +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for PL (Programmable Logic) Fabric Analog Wires + power supply. Z is the number in range of 0 to 3. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vcc_pspll0 +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for AMS (Analog Monitoring System) Systems PLLs + power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vcc_psbatt +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for AMS (Analog Monitoring System) Battery power + supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccbram +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for AMS (Analog Monitoring System) Block RAM power + supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_vccaux +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for AMS (Analog Monitoring System) Auxiliary power + supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_psddrpll +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for AMS (Analog Monitoring System) DDR I/O + PLLs [0:5] power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_psintfpddr +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Voltage input for AMS (Analog Monitoring System) DDR controller + power supply. + + +What: /sys/bus/iio/devices/iio:deviceX/in_tempY_ps_temp +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Temperature input for PS (Processing System) RPU MPCore. + + +What: /sys/bus/iio/devices/iio:deviceX/in_tempY_remote_temp +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Temperature input for PS (Processing System) APU MPCore. + + +What: /sys/bus/iio/devices/iio:deviceX/in_tempY_pl_temp +Date: September 2018 +KernelVersion: 4.19.0 +Contact: [email protected] +Description: + Temperature input for PL (Programmable Logic) SYSMON. -- 2.1.1
