>The problem seems to be the "pci_get_interrupt_pin()" call. We should not
>do that. The pirq table has the unmodified device information - and when
>we try to swizzle the pins and find the bridge that the device is behind,
>we're trying to be way too clever.
Both with/without the change you mention, I still get routing warnings
on bootup. I've pasted the output from my Athlon box, as that seems
most affected by this. Interrupts 11 & 12 are left free, whilst it
routes multiple devices onto interrupt 5.
PCI: Found IRQ 5 for device 00:09.0
PCI: The same IRQ used for device 00:04.2
PCI: The same IRQ used for device 00:04.3
emu10k1: EMU10K1 rev 5 model 0x20 found, IO at 0xb800-0xb81f, IRQ 5
PCI: Found IRQ 5 for device 00:04.2
PCI: The same IRQ used for device 00:04.3
PCI: The same IRQ used for device 00:09.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
PCI: Found IRQ 5 for device 00:04.3
PCI: The same IRQ used for device 00:04.2
PCI: The same IRQ used for device 00:09.0
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5
Interrupt routing table found at address 0xf0e90:
Version 1.0, size 0x0070
Interrupt router is device 00:04.0
PCI exclusive interrupt mask: 0x0000 []
Compatible router: vendor 0x1106 device 0x0686
Device 00:0c.0 (slot 1):
INTA: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x05, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:0b.0 (slot 2): Ethernet controller
INTA: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x05, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:09.0 (slot 4): Multimedia audio controller
INTA: link 0x05, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:04.0 (slot 0): ISA bridge
INTA: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x05, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:01.0 (slot 0): PCI bridge
INTA: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x05, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Interrupt router at 00:04.0: VIA 82C686 PCI-to-ISA bridge
PIRQA (link 0x01): irq 11
PIRQB (link 0x02): irq 10
PIRQC (link 0x03): unrouted
PIRQD (link 0x05): irq 5
regards,
Davej.
--
| Dave Jones <[EMAIL PROTECTED]> http://www.suse.de/~davej
| SuSE Labs
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
