Hi, Stefan Anson Huang Best Regards!
> -----Original Message----- > From: Anson Huang > Sent: Wednesday, September 12, 2018 4:30 PM > To: Stefan Wahren <[email protected]>; [email protected]; > [email protected]; [email protected]; Fabio Estevam > <[email protected]>; [email protected]; [email protected]; > [email protected]; [email protected]; > [email protected] > Cc: dl-linux-imx <[email protected]> > Subject: RE: [PATCH] ARM: dts: imx6ull: update vdd_soc voltage for 900MHz > operating point > > Hi, Stefan > > Anson Huang > Best Regards! > > > > -----Original Message----- > > From: Stefan Wahren <[email protected]> > > Sent: Wednesday, September 12, 2018 4:28 PM > > To: Anson Huang <[email protected]>; [email protected]; > > [email protected]; [email protected]; Fabio Estevam > > <[email protected]>; [email protected]; [email protected]; > > [email protected]; [email protected]; > > [email protected] > > Cc: dl-linux-imx <[email protected]> > > Subject: Re: [PATCH] ARM: dts: imx6ull: update vdd_soc voltage for > > 900MHz operating point > > > > Hi Anson, > > > > Am 12.09.2018 um 10:13 schrieb Anson Huang: > > > Update VDD_SOC voltage to 1.25V for 900MHz operating point according > > > to datasheet Rev. 1.3, 08/2018, 25mV is added to the minimum allowed > > > values to cover power supply ripple. > > > > is there a reason why the new datasheet isn't published yet? > > We just got this new datasheet recently, it will be published soon. > > Anson The v1.3 datasheet has been published. Please check it from NXP website, thanks. Anson. > > > > > Regards > > Stefan
