Nicolas Ferre wrote: > Fixes hanging using multi block operations (seen during CMD25). > Follows closely the datasheet flowcharts. > > This piece of code handles better big file writing. I had to take care > of the notbusy signal during write (at91_mci_handle_cmdrdy function) and > to rearrange the AT91_MCI_ENDRX and AT91_MCI_RXBUFF flag usage. > > Signed-off-by: Nicolas Ferre <[EMAIL PROTECTED]> > ---
Most of the patch looks ok. Do you want to wait for some more tests or should I chuck this into the imminent merge window? > @@ -817,7 +834,11 @@ static int __init at91_mci_probe(struct > mmc->ops = &at91_mci_ops; > mmc->f_min = 375000; > - mmc->f_max = 25000000; > + if (cpu_is_at91sam9263()) > + mmc->f_max = 50000000; > + else > + mmc->f_max = 25000000; > + > mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; > mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE; > This seems unrelated to the rest of the patch. Also, high-speed won't be enabled unless you set the appropriate caps (which should be checked against timing specifications, not just assigned and hope for the best). > @@ -830,11 +851,11 @@ static int __init at91_mci_probe(struct > host->bus_mode = 0; > host->board = pdev->dev.platform_data; > if (host->board->wire4) { > -#ifdef SUPPORT_4WIRE > - mmc->caps |= MMC_CAP_4_BIT_DATA; > -#else > - printk("AT91 MMC: 4 wire bus mode not supported by this driver > - using 1 wire\n"); > -#endif > + if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) > + mmc->caps |= MMC_CAP_4_BIT_DATA; > + else > + printk("AT91 MMC: 4 wire bus mode not supported" > + " - using 1 wire\n"); > } > > /* > This also looks unrelated. Rgds -- -- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org PulseAudio, core developer http://pulseaudio.org rdesktop, core developer http://www.rdesktop.org - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/