4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Rivshin <drivs...@allworx.com>

commit d733f7542ad47cf73e033c90cf55158587e1d060 upstream.

If an emac node has a phy-handle property that points to something
which is not a phy, then a segmentation fault will occur when the
interface is brought up. This is because while phy_connect() will
return ERR_PTR() on failure, of_phy_connect() will return NULL.
The common error check uses IS_ERR(), and so missed when
of_phy_connect() fails. The NULL pointer is then dereferenced.

Also, the common error message referenced slave->data->phy_id,
which would be empty in the case of phy-handle. Instead, use the
name of the device_node as a useful identifier. And in the phy_id
case add the error code for completeness.

Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing")
Signed-off-by: David Rivshin <drivs...@allworx.com>
Signed-off-by: David S. Miller <da...@davemloft.net>
[SZ Lin (林上智): Tweak the patch to use original print function of dev_info()]
Signed-off-by: SZ Lin (林上智) <sz....@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
 drivers/net/ethernet/ti/cpsw.c |   37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1164,25 +1164,34 @@ static void cpsw_slave_open(struct cpsw_
                cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
                                   1 << slave_port, 0, 0, ALE_MCAST_FWD_2);
 
-       if (slave->data->phy_node)
+       if (slave->data->phy_node) {
                slave->phy = of_phy_connect(priv->ndev, slave->data->phy_node,
                                 &cpsw_adjust_link, 0, slave->data->phy_if);
-       else
+               if (!slave->phy) {
+                       dev_err(priv->dev, "phy \"%s\" not found on slave %d\n",
+                               slave->data->phy_node->full_name,
+                               slave->slave_num);
+                       return;
+               }
+       } else {
                slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
                                 &cpsw_adjust_link, slave->data->phy_if);
-       if (IS_ERR(slave->phy)) {
-               dev_err(priv->dev, "phy %s not found on slave %d\n",
-                       slave->data->phy_id, slave->slave_num);
-               slave->phy = NULL;
-       } else {
-               dev_info(priv->dev, "phy found : id is : 0x%x\n",
-                        slave->phy->phy_id);
-               phy_start(slave->phy);
-
-               /* Configure GMII_SEL register */
-               cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface,
-                            slave->slave_num);
+               if (IS_ERR(slave->phy)) {
+                       dev_err(priv->dev,
+                               "phy \"%s\" not found on slave %d, err %ld\n",
+                               slave->data->phy_id, slave->slave_num,
+                               PTR_ERR(slave->phy));
+                       slave->phy = NULL;
+                       return;
+               }
        }
+
+       dev_info(priv->dev, "phy found : id is : 0x%x\n", slave->phy->phy_id);
+
+       phy_start(slave->phy);
+
+       /* Configure GMII_SEL register */
+       cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, slave->slave_num);
 }
 
 static inline void cpsw_add_default_vlan(struct cpsw_priv *priv)


Reply via email to