On 25 September 2018 22:02, Rob Herring wrote:
> On Thu, Sep 06, 2018 at 03:42:29PM +0100, Alan Douglas wrote:
> > Add DT binding documentation for Sierra PHY. The PHY supports
> > a number of different protocols, including PCIe and USB.
> >
> > The PHY lanes may be configured as single or multi-lane links.
> > Each link is treated as a separate subnode. For example, if
> > there are 4 lanes in total the first 2 may be configured as
> > a multi-lane PCIe link while the other two are single lane
> > USB links, and in this case there would be 3 subnodes.
> >
> > There are two resets for the PHY block, and additional resets,
> > one for each lane. For multi-lane links, only the reset for
> > the master lane is required, the resets on other lanes have no
> > effect.
> >
> > Signed-off-by: Alan Douglas <adoug...@cadence.com>
> > ---
> > .../devicetree/bindings/phy/cdns-sierra-phy.txt | 65
> > ++++++++++++++++++++++
> > 1 file changed, 65 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
> >
> > diff --git a/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
> > b/Documentation/devicetree/bindings/phy/cdns-sierra-
> phy.txt
> > new file mode 100644
> > index 0000000..94a8a7f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
> > @@ -0,0 +1,65 @@
> > +Cadence Sierra PHY
> > +-----------------------
> > +
> > +Required properties:
> > +- compatible: cdns,sierra-phy-t0
> > +- clocks: Must contain an entry in clock-names.
> > + See ../clocks/clock-bindings.txt for details.
> > +- clock-names: Must be "phy_clk"
> > +- resets: Must contain an entry for each in reset-names.
> > + See ../reset/reset.txt for details.
> > +- reset-names: Must include "sierra_reset" and "sierra_apb" and one
> > for each
> > + sub-node.
> > + "sierra_reset" must control the reset line to the PHY.
> > + "sierra_apb" must control the reset line to the APB PHY
> > + interface.
> > + Resets for each subnode must control the master lane for the
> > + subnode lane group.
>
> What are the names?
>
I'll update this to use the full name of the subnode, e.g. for subnodes:
pcie0_phy0: pcie-phy@0
pcie0_phy1: pcie-phy@2
then the reset names would be: "pcie-phy@0" and "pcie-phy@2"
> > +- reg: register range for the PHY.
> > +- reg-names: Must be "reg".
>
> Kind of pointless with only 1.
>
I will remove reg-names.
> > +- #address-cells: Should be 1
> > +- #size-cells: Should be 0
> > +
> > +Optional properties:
> > +- cdns,autoconf: If present, indicates that the PHY registers will
> > + be configured by hardware. If not present, all
> > + sub-node optional properties must be provided.
>
> boolean?
Yes, will update the description
>
> > +
> > +Sub-nodes:
> > + Each group of PHY lanes with a single master lane should be represented
> > as
> > + a sub-node. Note that the actual configuration of each lane is
> > determined by
> > + hardware strapping, and must match the configuration specified here.
> > +
> > +Sub-node required properties:
> > +- #phy-cells: Generic PHY binding; must be 0.
> > +
> > +Sub-node optional properties:
> > +- reg: The master lane number.
> > +- cdns,num-lanes: Number of lanes in this group. From 1 to 4.
> > +- cdns,phy-type: Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on
> > + configuration of lanes.
> > +
> > +Example:
> > + pcie_phy4: pcie-phy4@fd240000 {
>
> pcie-phy@fd240000
>
I'll change as suggested.
> > + compatible = "cdns,sierra-phy-t0";
> > + reg = <0x0 0xfd240000 0x0 0x40000>;
> > + reg-names = "reg";
> > + resets = <&phyrst 0>, <&phyrst 1>,<&phyrst 2>,<&phyrst 4>;
> > + reset-names = "sierra_reset","sierra_apb","pcie_phy0",pcie_phy1;
>
> spaces and quotes missing.
>
I'll reformat.
> > + clocks = <&phyclock>;
> > + clock-names = "phy_clk";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + pcie0_phy0: pcie-phy0@0 {
>
> pcie-phy@0
>
I'll change as suggested.
> > + reg = <0>;
> > + cdns,num-lanes = <2>;
> > + #phy-cells = <0>;
> > + cdns,phy-type = <PHY_TYPE_PCIE>;
> > + };
> > + pcie0_phy1: pcie-phy1@0 {
>
> pcie-phy@2
>
> Or reg should be 1?
>
reg is the master lane number, and in this case must be 2 or higher,
since the subnode with master lane number 0 has 2 lanes.
I'll change to pcie-phy@2, and add an explanation.
Thanks for your comments
> > + reg = <2>;
> > + cdns,num-lanes = <1>;
> > + #phy-cells = <0>;
> > + cdns,phy-type = <PHY_TYPE_PCIE>;
> > + };
> > +
> > --
> > 1.9.0
> >
