On Wed, Sep 19, 2018 at 02:04:45PM +0800, Anson Huang wrote:
> The i.MX 6ULZ processor is a high-performance, ultra
> cost-efficient consumer Linux processor featuring an
> advanced implementation of a single Arm® Cortex®-A7 core,
> which operates at speeds up to 900 MHz.
>
> This patch adds basic MSL support for i.MX6ULZ, the
> i.MX6ULZ has same soc_id as i.MX6ULL, and SRC_SBMR2 bit[6]
> is to differentiate i.MX6ULZ from i.MX6ULL, 1'b1 means
> i.MX6ULZ and 1'b0 means i.MX6ULL.
>
> Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> ---
> arch/arm/mach-imx/anatop.c | 20 ++++++++++++++++++++
> arch/arm/mach-imx/cpu.c | 3 +++
> arch/arm/mach-imx/mach-imx6ul.c | 1 +
> arch/arm/mach-imx/mxc.h | 7 +++++++
> arch/arm/mach-imx/pm-imx6.c | 4 ++--
> 5 files changed, 33 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
> index 61f3d94..45d618a 100644
> --- a/arch/arm/mach-imx/anatop.c
> +++ b/arch/arm/mach-imx/anatop.c
> @@ -31,6 +31,8 @@
> #define ANADIG_DIGPROG_IMX6SL 0x280
> #define ANADIG_DIGPROG_IMX7D 0x800
>
> +#define SRC_SBMR2 0x1c
> +
> #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
> #define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8
> #define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
> @@ -148,6 +150,24 @@ void __init imx_init_revision_from_anatop(void)
> major_part = (digprog >> 8) & 0xf;
> minor_part = digprog & 0xf;
> revision = ((major_part + 1) << 4) | minor_part;
> +
> + if ((digprog >> 16) == MXC_CPU_IMX6ULL) {
> + void __iomem *src_base;
> + u32 sbmr2;
> +
> + np = of_find_compatible_node(NULL, NULL,
> + "fsl,imx6ul-src");
> + src_base = of_iomap(np, 0);
> + WARN_ON(!src_base);
> + sbmr2 = readl_relaxed(src_base + SRC_SBMR2);
> + iounmap(src_base);
> +
> + /* src_sbmr2 bit 6 is to identify if it is i.MX6ULZ */
> + if (sbmr2 & (1 << 6)) {
> + digprog &= ~(0xff << 16);
> + digprog |= (MXC_CPU_IMX6ULZ << 16);
> + }
> + }
> }
>
> mxc_set_cpu_type(digprog >> 16 & 0xff);
> diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
> index c6b1bf9..c73593e 100644
> --- a/arch/arm/mach-imx/cpu.c
> +++ b/arch/arm/mach-imx/cpu.c
> @@ -136,6 +136,9 @@ struct device * __init imx_soc_device_init(void)
> case MXC_CPU_IMX6ULL:
> soc_id = "i.MX6ULL";
> break;
> + case MXC_CPU_IMX6ULZ:
> + soc_id = "i.MX6ULZ";
> + break;
> case MXC_CPU_IMX6SLL:
> soc_id = "i.MX6SLL";
> break;
> diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
> index 6cb8a22..4ffe3c8 100644
> --- a/arch/arm/mach-imx/mach-imx6ul.c
> +++ b/arch/arm/mach-imx/mach-imx6ul.c
> @@ -90,6 +90,7 @@ static void __init imx6ul_init_late(void)
> static const char * const imx6ul_dt_compat[] __initconst = {
> "fsl,imx6ul",
> "fsl,imx6ull",
> + "fsl,imx6ulz",
Can we have "fsl,imx6ull" on the DT compatible, so that we can save the
changes on kernel side, like this and the clock driver update (patch #2)?
compatible = "fsl,imx6ull", "fsl,imx6ulz";
I'm not sure if there is any problem with this approach. But you can
think about it.
Shawn
> NULL,
> };
>
> diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
> index 026e2ca..b130a53 100644
> --- a/arch/arm/mach-imx/mxc.h
> +++ b/arch/arm/mach-imx/mxc.h
> @@ -40,6 +40,8 @@
> #define MXC_CPU_IMX6Q 0x63
> #define MXC_CPU_IMX6UL 0x64
> #define MXC_CPU_IMX6ULL 0x65
> +/* virtual cpu id for i.mx6ulz */
> +#define MXC_CPU_IMX6ULZ 0x6b
> #define MXC_CPU_IMX6SLL 0x67
> #define MXC_CPU_IMX7D 0x72
>
> @@ -80,6 +82,11 @@ static inline bool cpu_is_imx6ull(void)
> return __mxc_cpu_type == MXC_CPU_IMX6ULL;
> }
>
> +static inline bool cpu_is_imx6ulz(void)
> +{
> + return __mxc_cpu_type == MXC_CPU_IMX6ULZ;
> +}
> +
> static inline bool cpu_is_imx6sll(void)
> {
> return __mxc_cpu_type == MXC_CPU_IMX6SLL;
> diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
> index 529f4b5..87f45b9 100644
> --- a/arch/arm/mach-imx/pm-imx6.c
> +++ b/arch/arm/mach-imx/pm-imx6.c
> @@ -313,7 +313,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
> if (cpu_is_imx6sl())
> val |= BM_CLPCR_BYPASS_PMIC_READY;
> if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
> - cpu_is_imx6ull() || cpu_is_imx6sll())
> + cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
> val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
> else
> val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
> @@ -331,7 +331,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
> if (cpu_is_imx6sl() || cpu_is_imx6sx())
> val |= BM_CLPCR_BYPASS_PMIC_READY;
> if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
> - cpu_is_imx6ull() || cpu_is_imx6sll())
> + cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
> val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
> else
> val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
> --
> 2.7.4
>
