This patch adds device tree binding doc for the Realtek RTL8186 SoC interrupt controller.
Signed-off-by: Yasha Cherikovsky <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Jason Cooper <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paul Burton <[email protected]> Cc: James Hogan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] --- .../interrupt-controller/realtek,rtl8186-intc | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtl8186-intc diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl8186-intc b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl8186-intc new file mode 100644 index 000000000000..21956d210021 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl8186-intc @@ -0,0 +1,18 @@ +Realtek RTL8186 SoC interrupt controller + +Required properties: + +- compatible : should be "realtek,rtl8186-intc" +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. +- reg : Specifies base physical address and size of the registers. + +Example: + +intc: interrupt-controller@1d010000 { + compatible = "realtek,rtl8186-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1d010000 0x8>; +}; -- 2.19.0
