Hi!

This error exists since 2.4.0-test10preX or so. It occurs when the
network interface is activated.

I'm using RedHat 7.0 and my ethernet card is a "Kingston EtheRx KNE20
Plug and Play ISA Adapter". I'm unable to access the Internet because
the ethernet card doesn't work :-(. Besides, the card uses two
interrupts (?) and there are two interfaces (eth0 y eth1) when I have
only one (?).

Besides, mouse stops working and hangs the computer if the network
interface is deactivated and I rerun the gpm program. Maybe, my hardware
is buggy but it works fine with 2.2.18.

Bye!
-- 
D. Juan Piernas Cánovas
Departamento de Ingeniería y Tecnología de Computadores
Facultad de Informática. Universidad de Murcia
Campus de Espinardo - 30080 Murcia (SPAIN)
Tel.: +34968367657    Fax: +34968364151
email: [EMAIL PROTECTED]
PGP public key:
http://pgp.rediris.es:11371/pks/lookup?search=piernas%40ditec.um.es&op=index
           CPU0       
  0:      11683          XT-PIC  timer
  1:        258          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:          1          XT-PIC  NE2000
 10:          0          XT-PIC  es1371
 12:          0          XT-PIC  NE2000
 14:       3047          XT-PIC  ide0
 15:          6          XT-PIC  ide1
NMI:          0 
LOC:          0 
ERR:          0

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0240-025f : eth1
02f8-02ff : serial(auto)
0300-031f : eth0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
e000-e00f : VIA Technologies, Inc. Bus Master IDE
  e000-e007 : ide0
  e008-e00f : ide1
e800-e83f : Ensoniq ES1371 [AudioPCI-97]
  e800-e83f : es1371

Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0 
Product version 1.0
  Logical device 0 'RTL8019:Unknown'
    Supported registers 0x2
    Compatible device PNP80d6
    Device is active
    Active port 0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff
    Active IRQ 255 [0xff],255 [0xff]
    Active DMA 255,255
    Active memory 0xffffffff,0xffffffff,0xffffffff,0xffffffff
    Resources 0
      Priority preferred
      Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding
      IRQ 3,4,5,2/9,10,11,12,15 High-Edge

Reply via email to