On Mon,  8 Oct 2018 16:41:39 +0530
Yogesh Gaur <yogeshnarayan.g...@nxp.com> wrote:

> +/* Registers used by the driver */
> +#define FSPI_MCR0                    0x00
> +#define FSPI_MCR0_AHB_TIMEOUT_MASK   GENMASK(31, 24)
> +#define FSPI_MCR0_IP_TIMEOUT_MASK    GENMASK(23, 16)

You never mask the IP_TIMEOUT val, so you don't need a _MASK macro
here. Just define

#define FSPI_MCR0_IP_TIMEOUT(x)         ((x) < 16)

The same goes for any field that you don't need to mask.

The only case you might need a mask def is when you have the following
pattern:

        val = readl(reg);
        val &= ~XXXX_MASK;
        val |= XXXX(new_field_val);
        writel(val, reg);

> +#define FSPI_MCR0_LEARN_EN_MASK              BIT(15)
> +#define FSPI_MCR0_SCRFRUN_EN_MASK    BIT(14)
> +#define FSPI_MCR0_OCTCOMB_EN_MASK    BIT(13)

Drop the _MASK suffix for any single-bit field:

#define FSPI_MCR0_OCTCOMB_EN            BIT(13)

Reply via email to