Hello, I'm trying to get samcop sdi controller (found e.g. in h5000 ipaqs) working with Apacer 2GB SD card. Samcop sdi, nor samcop in general is supported in vanilla kernel, but I'm not sure what could be wrong (I suspect either mmc_block or sdi driver), so I think lkml might be the right place.
My problem is that I can access only small portion of SD card -- roughly 224MB (in 512byte sectors, the boundary is 0x70000, inclusive). All reads/writes beyond this address cause errors like timeouts, fifo underrun, etc. (MMC errors 1, 3 and 4). DMA engine, which reads received data seems to be 'frozen' at incomplete transfer (counter of remaining blocks to be transferred is stopped at non-zero value, although something seems to be transferred, but that might not be useful data). Kernel version is 2.6.21, with handhelds.org patches. The SD card works correctly with other devices, like PCMCIA card readers. Also samcop sdi was able to fully read 512MB card. I'm not really sure what could cause behavior like this and I'm open to any suggestion. Also, please Cc me, as I'm not subscribed to linux-kernel... . Thank you, Milan Plzik - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/