[PATCH 3.16 038/366] parport_pc: Add support for WCH CH382L PCI-E single parallel port card.

[Ben Hutchings]

3.16.60-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Gerasiov <g...@redlab-i.ru>

commit 823f7923833c6cc2b16e601546d607dcfb368004 upstream.

WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382
but serial ports are not soldered on board. Detected as
Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])

Signed-off-by: Alexander Gerasiov <g...@redlab-i.ru>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
Signed-off-by: Ben Hutchings <b...@decadent.org.uk>
---
 drivers/parport/parport_pc.c | 4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2616,6 +2616,7 @@ enum parport_pc_pci_cards {
        netmos_9901,
        netmos_9865,
        quatech_sppxp100,
+       wch_ch382l,
 };
 
 
@@ -2678,6 +2679,7 @@ static struct parport_pc_pci {
        /* netmos_9901 */               { 1, { { 0, -1 }, } },
        /* netmos_9865 */               { 1, { { 0, -1 }, } },
        /* quatech_sppxp100 */          { 1, { { 0, 1 }, } },
+       /* wch_ch382l */                { 1, { { 2, -1 }, } },
 };
 
 static const struct pci_device_id parport_pc_pci_tbl[] = {
@@ -2767,6 +2769,8 @@ static const struct pci_device_id parpor
        /* Quatech SPPXP-100 Parallel port PCI ExpressCard */
        { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
          PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
+       /* WCH CH382L PCI-E single parallel port card */
+       { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l },
        { 0, } /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);