3.16.60-rc1 review patch. If anyone has any objections, please let me know.
------------------ From: Stefan Brüns <stefan.bru...@rwth-aachen.de> commit cfb926e148e99acc02351d72e8b85e32b5f786ef upstream. The ACK/NACK implementation as found in e.g. the G965 has the falling clock edge and the release of the data line after the ACK for the received byte happen at the same time. This is conformant with the I2C specification, which allows a zero hold time, see footnote [3]: "A device must internally provide a hold time of at least 300 ns for the SDA signal (with respect to the V IH(min) of the SCL signal) to bridge the undefined region of the falling edge of SCL." Some HDMI-to-VGA converters apparently fail to adhere to this requirement and latch SDA at the falling clock edge, so instead of an ACK sometimes a NACK is read and the slave (i.e. the EDID ROM) ends the transfer. The bitbanging releases the data line for the ACK only 1/4 bit time after the falling clock edge, so a slave will see the correct value no matter if it samples at the rising or the falling clock edge or in the center. Fallback to bitbanging is already done for the CRT connector. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92685 Signed-off-by: Stefan Brüns <stefan.bru...@rwth-aachen.de> Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a39f080b-81a5-4c93-b3f7-7cb0a58da...@rwthex-w2-a.rwth-ad.de [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <b...@decadent.org.uk> --- drivers/gpu/drm/i915/intel_hdmi.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -971,6 +971,7 @@ intel_hdmi_detect(struct drm_connector * struct edid *edid; enum intel_display_power_domain power_domain; enum drm_connector_status status = connector_status_disconnected; + struct i2c_adapter *i2c; DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, connector->name); @@ -981,9 +982,16 @@ intel_hdmi_detect(struct drm_connector * intel_hdmi->has_hdmi_sink = false; intel_hdmi->has_audio = false; intel_hdmi->rgb_quant_range_selectable = false; - edid = drm_get_edid(connector, - intel_gmbus_get_adapter(dev_priv, - intel_hdmi->ddc_bus)); + i2c = intel_gmbus_get_adapter(dev_priv, intel_hdmi->ddc_bus); + + edid = drm_get_edid(connector, i2c); + + if (!edid && !intel_gmbus_is_forced_bit(i2c)) { + DRM_DEBUG_KMS("HDMI GMBUS EDID read failed, retry using GPIO bit-banging\n"); + intel_gmbus_force_bit(i2c, true); + edid = drm_get_edid(connector, i2c); + intel_gmbus_force_bit(i2c, false); + } if (edid) { if (edid->input & DRM_EDID_INPUT_DIGITAL) {
