On Mon, 2018-10-15 at 14:05 +0800, Ryder Lee wrote: > On Mon, 2018-10-15 at 13:44 +0800, honghui.zh...@mediatek.com wrote: > > From: Honghui Zhang <honghui.zh...@mediatek.com> > > > > This patchset includes misc patchs: > > > > The patch 1 fixup the mtk_pcie_find_port logic which will cause system > > could not touch the EP's configuration space that connected to PCIe slot 1. > > > > The patch 2 fixup the class type for MT7622. > > The patch 6 fixup the enable msi logic, the operation to enable MSI > > should be after system clock is enabled. Call mtk_pcie_enable_msi in > > mtk_pcie_startup_port_v2 since the clock was all enabled at that time. > > > > The patch 7 was rebased and refactor of the v4 patch[1], changes are: > > -Add PM support for MT7622. > > -Using mtk_pcie_enable_port to re-establish the link when resumed. > > -Rebased on this patchset. > > > > The patch 9 add loadable kernel module support. > > > > [1] https://patchwork.kernel.org/patch/10479079 > > > > Change since v6: > > - Remove the pci_unmap_iospace when remove the device since the > > devm_pci_remap_iospace is an devm_ version. > > - Commit message changed for patch 2(Fix class type for MT7622 as > > PCI_CLASS_BRIDGE_PCI). > > - Capitilizing "MSI" and "PM" in the patch title. > > > > Change since v5: > > - A bit improvement of mtk_pcie_find_port suggest by Lorenzo. > > - Add fixup tags of fix enable MSI logic in patch 6. > > - Add Acked-by tags from Ryder. > > > > Change since v4: > > - Add patch 2 to fixup class type for MT7622. > > - Add patch 3 to remove the redundant dev->pm_domain check > > - Add patch 4 to covert to use pci_host_probe > > - Add patch 5 to re-arrange the function define, this is a prepare patch > > for > > fixup the enable_msi logic, no functional changed have been made by this > > one. > > - Add patch 8 to save the GIC IRQ in mtk_pcie_port as a prepare patch for > > tear > > down the irq when remove the kernel module. > > - Re-arrange the find_port flow suggest by Lorenzo to make the code parse > > easier > > for the patch 1. > > - Remove the .pm_support in mtk_pcie_soc in patch 7 since if system pm was > > not > > supported, then those pm callbacks will never be executed for MT7622. So > > the > > .pm_support is not needed. > > > > Change since v3: > > - Remove pm_runtime_XXX ops in suspend and resume callbacks in the third > > patch. > > - Rebase to 4.19-rc1. > > > > Change since v2: > > - Fix the list_for_each_entry_safe parameter error. > > - Add Ryder's Acked-by flag. > > > > Change since v1: > > - A bit of code refact of the first patch suggested by Andy Shevchenko, and > > commit message updated. > > > > Honghui Zhang (9): > > PCI: mediatek: Using slot's devfn for compare to fix > > mtk_pcie_find_port logic > > PCI: mediatek: Fix class type for MT7622 as PCI_CLASS_BRIDGE_PCI > > PCI: mediatek: Remove the redundant dev->pm_domain check > > PCI: mediatek: Convert to use pci_host_probe() > > PCI: mediatek: Move the mtk_pcie_startup_port_v2 function's define > > after mtk_pcie_setup_irq > > PCI: mediatek: Fixup enable MSI logic by enable MSI after clock > > enabled > > PCI: mediatek: Add system PM support for MT2712 and MT7622 > > PCI: mediatek: Save the GIC IRQ in mtk_pcie_port > > PCI: mediatek: Add loadable kernel module support > > > > drivers/pci/controller/Kconfig | 2 +- > > drivers/pci/controller/pcie-mediatek.c | 319 > > +++++++++++++++++++++------------ > > 2 files changed, 204 insertions(+), 117 deletions(-) > > > You forgot to add my Acked-by tags in v7. > > Acked-by: Ryder Lee <ryder....@mediatek.com> for the series.
Sorry about that, Lorenzo, do I need to re-send this series with Ryder's Acked-by tags? Thanks. > > Thanks. >
