All the upper case in unit-address and hex constants are
changed to lower case according to the DT conventions.
Reviewed-by: Rob Herring <r...@kernel.org>
Signed-off-by: Songjun Wu <songjun...@linux.intel.com>
---
arch/mips/boot/dts/lantiq/danube.dtsi | 42 ++++++++++++++++-----------------
arch/mips/boot/dts/lantiq/easy50712.dts | 14 +++++------
2 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi
b/arch/mips/boot/dts/lantiq/danube.dtsi
index 2dd950181f8a..510be63c8bdf 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -10,12 +10,12 @@
};
};
- biu@1F800000 {
+ biu@1f800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
- reg = <0x1F800000 0x800000>;
- ranges = <0x0 0x1F800000 0x7FFFFF>;
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x7fffff>;
icu0: icu@80200 {
#interrupt-cells = <1>;
@@ -24,18 +24,18 @@
reg = <0x80200 0x120>;
};
- watchdog@803F0 {
+ watchdog@803f0 {
compatible = "lantiq,wdt";
- reg = <0x803F0 0x10>;
+ reg = <0x803f0 0x10>;
};
};
- sram@1F000000 {
+ sram@1f000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram";
- reg = <0x1F000000 0x800000>;
- ranges = <0x0 0x1F000000 0x7FFFFF>;
+ reg = <0x1f000000 0x800000>;
+ ranges = <0x0 0x1f000000 0x7fffff>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
@@ -66,41 +66,41 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xEEFFFFF>;
- reg = <0x10000000 0xEF00000>;
+ ranges = <0x0 0x10000000 0xeefffff>;
+ reg = <0x10000000 0xef00000>;
- gptu@E100A00 {
+ gptu@e100a00 {
compatible = "lantiq,gptu-xway";
- reg = <0xE100A00 0x100>;
+ reg = <0xe100a00 0x100>;
};
- serial@E100C00 {
+ serial@e100c00 {
compatible = "lantiq,asc";
- reg = <0xE100C00 0x400>;
+ reg = <0xe100c00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
- dma0: dma@E104100 {
+ dma0: dma@e104100 {
compatible = "lantiq,dma-xway";
- reg = <0xE104100 0x800>;
+ reg = <0xe104100 0x800>;
};
- ebu0: ebu@E105300 {
+ ebu0: ebu@e105300 {
compatible = "lantiq,ebu-xway";
- reg = <0xE105300 0x100>;
+ reg = <0xe105300 0x100>;
};
- pci0: pci@E105400 {
+ pci0: pci@e105400 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000
/* pci memory */
- 0x1000000 0 0x00000000 0xAE00000 0 0x200000>;
/* io space */
+ 0x1000000 0 0x00000000 0xae00000 0 0x200000>;
/* io space */
reg = <0x7000000 0x8000 /* config space */
- 0xE105400 0x400>; /* pci bridge */
+ 0xe105400 0x400>; /* pci bridge */
};
};
};
diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts
b/arch/mips/boot/dts/lantiq/easy50712.dts
index c37a33962f28..1ce20b7d05cb 100644
--- a/arch/mips/boot/dts/lantiq/easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/easy50712.dts
@@ -52,14 +52,14 @@
};
};
- gpio: pinmux@E100B10 {
+ gpio: pinmux@e100b10 {
compatible = "lantiq,danube-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
- reg = <0xE100B10 0xA0>;
+ reg = <0xe100b10 0xa0>;
state_default: pinmux {
stp {
@@ -82,26 +82,26 @@
};
};
- etop@E180000 {
+ etop@e180000 {
compatible = "lantiq,etop-xway";
- reg = <0xE180000 0x40000>;
+ reg = <0xe180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
};
- stp0: stp@E100BB0 {
+ stp0: stp@e100bb0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
- reg = <0xE100BB0 0x40>;
+ reg = <0xe100bb0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
- pci@E105400 {
+ pci@e105400 {
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
--
2.11.0
