Commit-ID: 94aafb74cee0002e2f2eb6dc5376f54d5951ab4d
Gitweb: https://git.kernel.org/tip/94aafb74cee0002e2f2eb6dc5376f54d5951ab4d
Author: Jiri Olsa <jo...@redhat.com>
AuthorDate: Wed, 10 Oct 2018 10:03:39 +0200
Committer: Arnaldo Carvalho de Melo <a...@redhat.com>
CommitDate: Thu, 11 Oct 2018 11:13:23 -0300
perf vendor events intel: Fix wrong filter_band* values for uncore events
Michael reported that he could not stat following event:
$ perf stat -e unc_p_freq_ge_1200mhz_cycles -a -- ls
event syntax error: '..e_1200mhz_cycles'
\___ value too big for format, maximum is
255
Run 'perf list' for a list of valid events
The event is unwrapped into:
uncore_pcu/event=0xb,filter_band0=1200/
where filter_band0 format says it's one byte only:
# cat uncore_pcu/format/filter_band0
config1:0-7
while JSON files specifies bigger number:
"Filter": "filter_band0=1200",
all the filter_band* formats show 1 byte width:
# cat uncore_pcu/format/filter_band1
config1:8-15
# cat uncore_pcu/format/filter_band2
config1:16-23
# cat uncore_pcu/format/filter_band3
config1:24-31
The reason of the issue is that filter_band* values are supposed to be
in 100Mhz units.. it's stated in the JSON help for the events, like:
filter_band3=XXX, with XXX in 100Mhz units
This patch divides the filter_band* values by 100, plus there's couple
of changes that actually change the number completely, like:
- "Filter": "edge=1,filter_band2=4000",
+ "Filter": "edge=1,filter_band2=30",
Reported-by: Michael Petlan <mpet...@redhat.com>
Signed-off-by: Jiri Olsa <jo...@kernel.org>
Acked-by: Andi Kleen <a...@linux.intel.com>
Cc: Alexander Shishkin <alexander.shish...@linux.intel.com>
Cc: Kan Liang <kan.li...@linux.intel.com>
Cc: Namhyung Kim <namhy...@kernel.org>
Cc: Peter Zijlstra <pet...@infradead.org>
Link: http://lkml.kernel.org/r/20181010080339.GB15790@krava
Signed-off-by: Arnaldo Carvalho de Melo <a...@redhat.com>
---
tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json | 16 ++++++++--------
.../perf/pmu-events/arch/x86/jaketown/uncore-power.json | 16 ++++++++--------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
index d40498f2cb1e..635c09fda1d9 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
@@ -188,7 +188,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_P_FREQ_GE_1200MHZ_CYCLES",
- "Filter": "filter_band0=1200",
+ "Filter": "filter_band0=12",
"MetricExpr": "(UNC_P_FREQ_GE_1200MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_1200mhz_cycles %",
"PerPkg": "1",
@@ -199,7 +199,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_P_FREQ_GE_2000MHZ_CYCLES",
- "Filter": "filter_band1=2000",
+ "Filter": "filter_band1=20",
"MetricExpr": "(UNC_P_FREQ_GE_2000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_2000mhz_cycles %",
"PerPkg": "1",
@@ -210,7 +210,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_P_FREQ_GE_3000MHZ_CYCLES",
- "Filter": "filter_band2=3000",
+ "Filter": "filter_band2=30",
"MetricExpr": "(UNC_P_FREQ_GE_3000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_3000mhz_cycles %",
"PerPkg": "1",
@@ -221,7 +221,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xe",
"EventName": "UNC_P_FREQ_GE_4000MHZ_CYCLES",
- "Filter": "filter_band3=4000",
+ "Filter": "filter_band3=40",
"MetricExpr": "(UNC_P_FREQ_GE_4000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_4000mhz_cycles %",
"PerPkg": "1",
@@ -232,7 +232,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_P_FREQ_GE_1200MHZ_TRANSITIONS",
- "Filter": "edge=1,filter_band0=1200",
+ "Filter": "edge=1,filter_band0=12",
"MetricExpr": "(UNC_P_FREQ_GE_1200MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_1200mhz_cycles %",
"PerPkg": "1",
@@ -243,7 +243,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_P_FREQ_GE_2000MHZ_TRANSITIONS",
- "Filter": "edge=1,filter_band1=2000",
+ "Filter": "edge=1,filter_band1=20",
"MetricExpr": "(UNC_P_FREQ_GE_2000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_2000mhz_cycles %",
"PerPkg": "1",
@@ -254,7 +254,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_P_FREQ_GE_3000MHZ_TRANSITIONS",
- "Filter": "edge=1,filter_band2=4000",
+ "Filter": "edge=1,filter_band2=30",
"MetricExpr": "(UNC_P_FREQ_GE_3000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_3000mhz_cycles %",
"PerPkg": "1",
@@ -265,7 +265,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xe",
"EventName": "UNC_P_FREQ_GE_4000MHZ_TRANSITIONS",
- "Filter": "edge=1,filter_band3=4000",
+ "Filter": "edge=1,filter_band3=40",
"MetricExpr": "(UNC_P_FREQ_GE_4000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_4000mhz_cycles %",
"PerPkg": "1",
diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
b/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
index 16034bfd06dd..8755693d86c6 100644
--- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
+++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
@@ -187,7 +187,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_P_FREQ_GE_1200MHZ_CYCLES",
- "Filter": "filter_band0=1200",
+ "Filter": "filter_band0=12",
"MetricExpr": "(UNC_P_FREQ_GE_1200MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_1200mhz_cycles %",
"PerPkg": "1",
@@ -198,7 +198,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_P_FREQ_GE_2000MHZ_CYCLES",
- "Filter": "filter_band1=2000",
+ "Filter": "filter_band1=20",
"MetricExpr": "(UNC_P_FREQ_GE_2000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_2000mhz_cycles %",
"PerPkg": "1",
@@ -209,7 +209,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_P_FREQ_GE_3000MHZ_CYCLES",
- "Filter": "filter_band2=3000",
+ "Filter": "filter_band2=30",
"MetricExpr": "(UNC_P_FREQ_GE_3000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_3000mhz_cycles %",
"PerPkg": "1",
@@ -220,7 +220,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xe",
"EventName": "UNC_P_FREQ_GE_4000MHZ_CYCLES",
- "Filter": "filter_band3=4000",
+ "Filter": "filter_band3=40",
"MetricExpr": "(UNC_P_FREQ_GE_4000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_4000mhz_cycles %",
"PerPkg": "1",
@@ -231,7 +231,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_P_FREQ_GE_1200MHZ_TRANSITIONS",
- "Filter": "edge=1,filter_band0=1200",
+ "Filter": "edge=1,filter_band0=12",
"MetricExpr": "(UNC_P_FREQ_GE_1200MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_1200mhz_cycles %",
"PerPkg": "1",
@@ -242,7 +242,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_P_FREQ_GE_2000MHZ_TRANSITIONS",
- "Filter": "edge=1,filter_band1=2000",
+ "Filter": "edge=1,filter_band1=20",
"MetricExpr": "(UNC_P_FREQ_GE_2000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_2000mhz_cycles %",
"PerPkg": "1",
@@ -253,7 +253,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_P_FREQ_GE_3000MHZ_TRANSITIONS",
- "Filter": "edge=1,filter_band2=4000",
+ "Filter": "edge=1,filter_band2=30",
"MetricExpr": "(UNC_P_FREQ_GE_3000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_3000mhz_cycles %",
"PerPkg": "1",
@@ -264,7 +264,7 @@
"Counter": "0,1,2,3",
"EventCode": "0xe",
"EventName": "UNC_P_FREQ_GE_4000MHZ_TRANSITIONS",
- "Filter": "edge=1,filter_band3=4000",
+ "Filter": "edge=1,filter_band3=40",
"MetricExpr": "(UNC_P_FREQ_GE_4000MHZ_CYCLES / UNC_P_CLOCKTICKS) *
100.",
"MetricName": "freq_ge_4000mhz_cycles %",
"PerPkg": "1",
