In the previous version of the driver resume/suspend_noirq callbacks
were used. Because of this, when resuming from suspend-to-ram,
an I2C (belonging to a FLEXCOM) would resume before FLEXCOM.
The first read on the I2C bus would then result in a timeout.
This patch switches to resume/suspend callbacks which are
called after FLEXCOM resumes. FLEXCOM, SPI and USART drivers use
resume/suspend callbacks.
Signed-off-by: Andrei Stefanescu <andrei.stefane...@microchip.com>
---
drivers/i2c/busses/i2c-at91.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index bfd1fdf..81f7b94 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -1174,7 +1174,7 @@ static int at91_twi_runtime_resume(struct device *dev)
return clk_prepare_enable(twi_dev->clk);
}
-static int at91_twi_suspend_noirq(struct device *dev)
+static int at91_twi_suspend(struct device *dev)
{
if (!pm_runtime_status_suspended(dev))
at91_twi_runtime_suspend(dev);
@@ -1182,7 +1182,7 @@ static int at91_twi_suspend_noirq(struct device *dev)
return 0;
}
-static int at91_twi_resume_noirq(struct device *dev)
+static int at91_twi_resume(struct device *dev)
{
struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
int ret;
@@ -1202,8 +1202,8 @@ static int at91_twi_resume_noirq(struct device *dev)
}
static const struct dev_pm_ops at91_twi_pm = {
- .suspend_noirq = at91_twi_suspend_noirq,
- .resume_noirq = at91_twi_resume_noirq,
+ .suspend = at91_twi_suspend,
+ .resume = at91_twi_resume,
.runtime_suspend = at91_twi_runtime_suspend,
.runtime_resume = at91_twi_runtime_resume,
};
--
2.7.4
