Remove support for the LM3633 from the ti-lmu
driver in favor of a dedicated LED driver.
Signed-off-by: Dan Murphy <dmur...@ti.com>
---
drivers/mfd/Kconfig | 2 +-
drivers/mfd/ti-lmu.c | 21 ---------------------
2 files changed, 1 insertion(+), 22 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9b04dd527c68..225cb3be350c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1293,7 +1293,7 @@ config MFD_TI_LMU
help
Say yes here to enable support for TI LMU chips.
- TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, and LM3695.
+ TI LMU MFD supports LM3532, LM3631, LM3632, and LM3695.
It consists of backlight, LED and regulator driver.
It provides consistent device controls for lighting functions.
diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c
index b6bfa99a29dd..2cf8a23cba52 100644
--- a/drivers/mfd/ti-lmu.c
+++ b/drivers/mfd/ti-lmu.c
@@ -102,24 +102,6 @@ static struct mfd_cell lm3632_devices[] = {
},
};
-static struct mfd_cell lm3633_devices[] = {
- {
- .name = "ti-lmu-backlight",
- .id = LM3633,
- .of_compatible = "ti,lm3633-backlight",
- },
- {
- .name = "lm3633-leds",
- .of_compatible = "ti,lm3633-leds",
- },
- /* Monitoring driver for open/short circuit detection */
- {
- .name = "ti-lmu-fault-monitor",
- .id = LM3633,
- .of_compatible = "ti,lm3633-fault-monitor",
- },
-};
-
static struct mfd_cell lm3695_devices[] = {
{
.name = "ti-lmu-backlight",
@@ -139,14 +121,12 @@ static const struct ti_lmu_data chip##_data = \
TI_LMU_DATA(lm3532, LM3532_MAX_REG);
TI_LMU_DATA(lm3631, LM3631_MAX_REG);
TI_LMU_DATA(lm3632, LM3632_MAX_REG);
-TI_LMU_DATA(lm3633, LM3633_MAX_REG);
TI_LMU_DATA(lm3695, LM3695_MAX_REG);
static const struct of_device_id ti_lmu_of_match[] = {
{ .compatible = "ti,lm3532", .data = &lm3532_data },
{ .compatible = "ti,lm3631", .data = &lm3631_data },
{ .compatible = "ti,lm3632", .data = &lm3632_data },
- { .compatible = "ti,lm3633", .data = &lm3633_data },
{ .compatible = "ti,lm3695", .data = &lm3695_data },
{ }
};
@@ -219,7 +199,6 @@ static const struct i2c_device_id ti_lmu_ids[] = {
{ "lm3532", LM3532 },
{ "lm3631", LM3631 },
{ "lm3632", LM3632 },
- { "lm3633", LM3633 },
{ "lm3695", LM3695 },
{ }
};
--
2.19.0
