On 23/10/2018 18:03, Jerome Brunet wrote:
> If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set()
> with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will
> force a pull-down bias on the pin.
>
> Instead of the pull type register bank, the driver should access the pull
> enable register bank.
>
> Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs")
> Signed-off-by: Jerome Brunet <[email protected]>
> ---
> drivers/pinctrl/meson/pinctrl-meson.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/meson/pinctrl-meson.c
> b/drivers/pinctrl/meson/pinctrl-meson.c
> index 29a458da78db..4f3ab18636a3 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson.c
> @@ -192,7 +192,7 @@ static int meson_pinconf_set(struct pinctrl_dev *pcdev,
> unsigned int pin,
> dev_dbg(pc->dev, "pin %u: disable bias\n", pin);
>
> meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
> - ret = regmap_update_bits(pc->reg_pull, reg,
> + ret = regmap_update_bits(pc->reg_pullen, reg,
> BIT(bit), 0);
> if (ret)
> return ret;
>
Acked-by: Neil Armstrong <[email protected]>
Nice catch !
Neil
