Hi, The Crystal CS89x0 ethernet chip is also used in quite some embedded systems that don't have an ISA bus at all, so the CONFIG_ISA option in drivers/net/Config.in is inapropriate. Here is a patch against 2.4.0-test12 to fix that. Please consider applying. Erik Index: drivers/net/Config.in =================================================================== RCS file: /home/erik/cvsroot/elinux/drivers/net/Config.in,v retrieving revision 1.1.1.39 diff -u -r1.1.1.39 Config.in --- drivers/net/Config.in 2000/12/07 14:16:21 1.1.1.39 +++ drivers/net/Config.in 2000/12/13 14:22:02 @@ -134,7 +138,7 @@ fi tristate ' Apricot Xen-II on board Ethernet' CONFIG_APRICOT - dep_tristate ' CS89x0 support' CONFIG_CS89x0 $CONFIG_ISA + tristate ' CS89x0 support' CONFIG_CS89x0 dep_tristate ' DECchip Tulip (dc21x4x) PCI support' CONFIG_TULIP $CONFIG_PCI if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then tristate ' Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5 -- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED] WWW: http://www-ict.its.tudelft.nl/~erik/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/