On Fri, Oct 26, 2018 at 07:34:50PM +0530, Balakrishna Godavarthi wrote:
> This patch add qca_set_device_bdaddr() to set the device
> address for latest Qualcomm Bluetooth chipset wcn3990 and above.
>
> Signed-off-by: Balakrishna Godavarthi <bgoda...@codeaurora.org>
> ---
> drivers/bluetooth/btqca.c | 21 +++++++++++++++++++++
> drivers/bluetooth/btqca.h | 9 ++++++++-
> drivers/bluetooth/hci_qca.c | 5 ++++-
> 3 files changed, 33 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index ec9e03a6b778..132dc6ceb174 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -391,6 +391,27 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
> baudrate,
> }
> EXPORT_SYMBOL_GPL(qca_uart_setup);
>
> +int qca_set_device_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
nit: just qca_set_bdaddr() ? That would be consistent with
qca_set_bdaddr_rome() and ->set_bdaddr().
> +{
> + struct sk_buff *skb;
> + u8 cmd[6];
nit: this doesn't really contain the command (which is
EDL_WRITE_BD_ADDR_OPCODE). Name it 'buf', 'ba' or similar?
re-nit: in the memcpy below 'sizeof(bdaddr_t)' is used, do the same in
the declaration?
> + int err;
> +
> + memcpy(cmd, bdaddr, sizeof(bdaddr_t));
> + skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, sizeof(cmd),
> + cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
> + return err;
> + }
> +
> + kfree_skb(skb);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(qca_set_device_bdaddr);
> +
> MODULE_AUTHOR("Ben Young Tae Kim <yt...@qca.qualcomm.com>");
> MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver "
> VERSION);
> MODULE_VERSION(VERSION);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 0c01f375fe83..8771fc2b193d 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -20,6 +20,7 @@
>
> #define EDL_PATCH_CMD_OPCODE (0xFC00)
> #define EDL_NVM_ACCESS_OPCODE (0xFC0B)
> +#define EDL_WRITE_BD_ADDR_OPCODE (0xFC14)
> #define EDL_PATCH_CMD_LEN (1)
> #define EDL_PATCH_VER_REQ_CMD (0x19)
> #define EDL_PATCH_TLV_REQ_CMD (0x1E)
> @@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const
> bdaddr_t *bdaddr);
> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> enum qca_btsoc_type soc_type, u32 soc_ver);
> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
> -
> +int qca_set_device_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> #else
>
> static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t
> *bdaddr)
> @@ -159,4 +160,10 @@ static inline int qca_read_soc_version(struct hci_dev
> *hdev, u32 *soc_version)
> return -EOPNOTSUPP;
> }
>
> +static inline int qca_set_device_bdaddr(struct hci_dev *hdev,
> + const bdaddr_t *bdaddr)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> #endif
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index f036c8f98ea3..f18d9f5a7782 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
> }
>
> /* Setup bdaddr */
> - hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
> + if (qcadev->btsoc_type == QCA_WCN3990)
> + hu->hdev->set_bdaddr = qca_set_device_bdaddr;
> + else
> + hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
>
> return ret;
> }
Reviewed-by: Matthias Kaehlcke <m...@chromium.org>
Tested-by: Matthias Kaehlcke <m...@chromium.org>
