The SSD130x OLED display reset signal is active low. Now the reset sequence is implemented in such a way that DTS authors are forced to define the reset-gpios property with GPIO_ACTIVE_HIGH to make the reset work.
Add the reset-active-low property so the signal is inverted once again and the GPIO_ACTIVE_LOW work as expected. Signed-off-by: Michal Vokáč <[email protected]> --- drivers/video/fbdev/ssd1307fb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c index e7ae135..790f1c4 100644 --- a/drivers/video/fbdev/ssd1307fb.c +++ b/drivers/video/fbdev/ssd1307fb.c @@ -608,6 +608,7 @@ static int ssd1307fb_probe(struct i2c_client *client, struct fb_deferred_io *ssd1307fb_defio; u32 vmem_size; struct ssd1307fb_par *par; + bool reset_active_low; u8 *vmem; int ret; @@ -671,6 +672,7 @@ static int ssd1307fb_probe(struct i2c_client *client, par->com_seq = of_property_read_bool(node, "solomon,com-seq"); par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap"); par->com_invdir = of_property_read_bool(node, "solomon,com-invdir"); + reset_active_low = of_property_read_bool(node, "reset-active-low"); par->contrast = 127; par->vcomh = par->device_info->default_vcomh; @@ -728,9 +730,9 @@ static int ssd1307fb_probe(struct i2c_client *client, if (par->reset) { /* Reset the screen */ - gpiod_set_value_cansleep(par->reset, 0); + gpiod_set_value_cansleep(par->reset, reset_active_low); udelay(4); - gpiod_set_value_cansleep(par->reset, 1); + gpiod_set_value_cansleep(par->reset, !reset_active_low); udelay(4); } -- 2.1.4
