Vitaly Bordug wrote:
device_bind_driver() error code returning has been fixed. release() function has been written, so that to free resources
in correct way; the release path is now clean.

Before the rework, it used to cause
 Device '[EMAIL PROTECTED]:1' does not have a release() function, it is broken
 and must be fixed.
 BUG: at drivers/base/core.c:104 device_release()
Call Trace: [<ffffffff802ec380>] kobject_cleanup+0x53/0x7e
  [<ffffffff802ec3ab>] kobject_release+0x0/0x9
  [<ffffffff802ecf3f>] kref_put+0x74/0x81
  [<ffffffff8035493b>] fixed_mdio_register_device+0x230/0x265
  [<ffffffff80564d31>] fixed_init+0x1f/0x35
  [<ffffffff802071a4>] init+0x147/0x2fb
  [<ffffffff80223b6e>] schedule_tail+0x36/0x92
  [<ffffffff8020a678>] child_rip+0xa/0x12
  [<ffffffff80311714>] acpi_ds_init_one_object+0x0/0x83
  [<ffffffff8020705d>] init+0x0/0x2fb
[<ffffffff8020a66e>] child_rip+0x0/0x12

Also changed the notation of the fixed phy definition on
mdio bus to the form of <speed>+<duplex> to make it able to be used by
gianfar and ucc_geth that define phy_id strictly as "%d:%d"

Signed-off-by: Vitaly Bordug <[EMAIL PROTECTED]>

---

 drivers/net/phy/Kconfig |    4 ++
 drivers/net/phy/fixed.c |   93 +++++++++++++++++++++++++++--------------------
 2 files changed, 57 insertions(+), 40 deletions(-)

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 09b6f25..a938c48 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -71,4 +71,8 @@ config FIXED_MII_100_FDX
        bool "Emulation for 100M Fdx fixed PHY behavior"
        depends on FIXED_PHY
+config FIXED_MII_1000_FDX
+       bool "Emulation for 1000M Fdx fixed PHY behavior"
+       depends on FIXED_PHY
+
 endif # PHYLIB
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index 68c99b4..34b9111 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -187,12 +187,29 @@ static struct phy_driver fixed_mdio_driver = {
        .driver         = { .owner = THIS_MODULE,},
 };
+static void fixed_mdio_release (struct device * dev)
+{
+       struct phy_device *phydev = container_of(dev, struct phy_device, dev);
+       struct mii_bus *bus = phydev->bus;
+       struct fixed_info *fixed = bus->priv;
+
+       kfree(phydev);
+       kfree(bus->dev);
+       kfree(bus);
+       kfree(fixed->regs);
+       kfree(fixed);
+}
+
 /*-----------------------------------------------------------------------------
  *  This func is used to create all the necessary stuff, bind
  * the fixed phy driver and register all it on the mdio_bus_type.
- * speed is either 10 or 100, duplex is boolean.
+ * speed is either 10 or 100 or 1000, duplex is boolean.
  * number is used to create multiple fixed PHYs, so that several devices can
  * utilize them simultaneously.
+ *
+ * The device on mdio bus will look like <bus_id>:<phy_id>,
+ * bus_id = number + * phy_id = speed+duplex.
  
*-----------------------------------------------------------------------------*/
 static int fixed_mdio_register_device(int number, int speed, int duplex)
 {
@@ -221,6 +238,12 @@ static int fixed_mdio_register_device(int number, int 
speed, int duplex)
        }
fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
+       if (NULL == fixed->regs) {
+               kfree(dev);
+               kfree(new_bus);
+               kfree(fixed);
+               return -ENOMEM;
+       }
        fixed->regs_num = MII_REGS_NUM;
        fixed->phy_status.speed = speed;
        fixed->phy_status.duplex = duplex;
@@ -249,57 +272,43 @@ static int fixed_mdio_register_device(int number, int 
speed, int duplex)
        fixed->phydev = phydev;
if(NULL == phydev) {
-               err = -ENOMEM;
-               goto device_create_fail;
+               kfree(dev);
+               kfree(new_bus);
+               kfree(fixed->regs);
+               kfree(fixed);
+               return -ENOMEM;
        }
phydev->irq = PHY_IGNORE_INTERRUPT;
        phydev->dev.bus = &mdio_bus_type;
- if(number)
-               snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
-                               "[EMAIL PROTECTED]:%d", number, speed, duplex);
-       else
-               snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
-                               "[EMAIL PROTECTED]:%d", speed, duplex);
+       snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
+                               "%d:%d", number, speed + duplex);
+
        phydev->bus = new_bus;
+ phydev->dev.driver = &fixed_mdio_driver.driver;
+       phydev->dev.release = fixed_mdio_release;
+ + err = phydev->dev.driver->probe(&phydev->dev);
+       if(err < 0) {
+               printk(KERN_ERR "Phy %s: problems with fixed driver\n",
+                               phydev->dev.bus_id);
+               kfree(phydev);
+               kfree(dev);
+               kfree(new_bus);
+               kfree(fixed->regs);
+               kfree(fixed);
+               return err;
+       }
+ err = device_register(&phydev->dev);
        if(err) {
                printk(KERN_ERR "Phy %s failed to register\n",
                                phydev->dev.bus_id);
-               goto bus_register_fail;
-       }

use the standard 'goto' style found in the kernel, rather than repeating all these kfree's.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to