On Fri, 9 Nov 2018 17:40:55 +0200
Stefan Popa <stefan.p...@analog.com> wrote:
> There are several ADC drivers that depend on the same device tree
> bindings. Rather than continue to duplicate the properties, this patch
> adds a common adc binding document that can be referenced. For beginning,
> only two properties are documented.
>
> Signed-off-by: Stefan Popa <stefan.p...@analog.com>
Hi Stefan,
Looks good to me. Given the 'generic' nature of this one though I would
like to leave some time for Rob and other devicetree specialists to sanity
check it.
Thanks,
Jonathan
> ---
> Changes in v2, v3:
> - N/A.
> Changes in v4:
> - Added this commit.
>
> Documentation/devicetree/bindings/iio/adc/adc.txt | 25
> +++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/adc.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adc.txt
> b/Documentation/devicetree/bindings/iio/adc/adc.txt
> new file mode 100644
> index 0000000..1e3cc21
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adc.txt
> @@ -0,0 +1,25 @@
> +Common ADCs properties
> +
> +This binding is a work-in-progress
> +
> +Optional properties for child nodes:
> +- bipolar : Boolean, if set the channel is used in bipolar mode.
> +- diff-channels : Differential channels muxed for this ADC. The first value
> + specifies the positive input pin, the second value the negative
> + input pin.
> +
> +Example:
> + adc@0 {
> + compatible = "some,adc";
> + ...
> + channel@0 {
> + bipolar;
> + diff-channels = <0 1>;
> + ...
> + };
> +
> + channel@1 {
> + diff-channels = <2 3>;
> + ...
> + };
> + };
