I've gotten the base addresses, clocks and interrupts from an rusty and old
out-of-tree driver. I haven't actually checked against the datasheet, since
that one is reserved for the Marvell inner circle.
Tested with an accelerometer on TWSI6 on an OLPC XO 1.75 machine.
Signed-off-by: Lubomir Rintel <lkund...@v3.sk>
Acked-by: Pavel Machek <pa...@ucw.cz>
---
arch/arm/boot/dts/mmp2.dtsi | 49 +++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 63d49abf4e92..7549680ab2e3 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -269,6 +269,55 @@
status = "disabled";
};
+ twsi3: i2c@d4032000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4032000 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <1>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI2>;
+ resets = <&soc_clocks MMP2_CLK_TWSI2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ twsi4: i2c@d4033000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4033000 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <2>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI3>;
+ resets = <&soc_clocks MMP2_CLK_TWSI3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+
+ twsi5: i2c@d4033800 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4033800 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <3>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI4>;
+ resets = <&soc_clocks MMP2_CLK_TWSI4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ twsi6: i2c@d4034000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4034000 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <4>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI5>;
+ resets = <&soc_clocks MMP2_CLK_TWSI5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
rtc: rtc@d4010000 {
compatible = "mrvl,mmp-rtc";
reg = <0xd4010000 0x1000>;
--
2.19.1
