On Mon 12 Nov 12:25 PST 2018, Craig Tatlor wrote:

> This was missed when tiles support was added in a revison and
> causes the driver to fail to load.
> 
> Fixes: 9cf0c526bc58 ("pinctrl: qcom: Add sdm660 pinctrl driver")
> Signed-off-by: Craig Tatlor <[email protected]>
> ---

Sorry for not spotting this in my previous review.

Reviewed-by: Bjorn Andersson <[email protected]>

Regards,
Bjorn

>  drivers/pinctrl/qcom/pinctrl-sdm660.c | 28 ++++++++++++++-------------
>  1 file changed, 15 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-sdm660.c 
> b/drivers/pinctrl/qcom/pinctrl-sdm660.c
> index 6838b38555a1..1bfb0ae6b387 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sdm660.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sdm660.c
> @@ -33,7 +33,7 @@ enum {
>       }
>  
>  
> -#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9)       \
> +#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9)      \
>       {                                               \
>               .name = "gpio" #id,                     \
>               .pins = gpio##id##_pins,                \
> @@ -51,11 +51,12 @@ enum {
>                       msm_mux_##f9                    \
>               },                                      \
>               .nfuncs = 10,                           \
> -             .ctl_reg = base + REG_SIZE * id,        \
> -             .io_reg = base + 0x4 + REG_SIZE * id,           \
> -             .intr_cfg_reg = base + 0x8 + REG_SIZE * id,             \
> -             .intr_status_reg = base + 0xc + REG_SIZE * id,  \
> -             .intr_target_reg = base + 0x8 + REG_SIZE * id,  \
> +             .ctl_reg = REG_SIZE * id,               \
> +             .io_reg = 0x4 + REG_SIZE * id,          \
> +             .intr_cfg_reg = 0x8 + REG_SIZE * id,    \
> +             .intr_status_reg = 0xc + REG_SIZE * id, \
> +             .intr_target_reg = 0x8 + REG_SIZE * id, \
> +             .tile = _tile,                  \
>               .mux_bit = 2,                   \
>               .pull_bit = 0,                  \
>               .drv_bit = 6,                   \
> @@ -82,6 +83,7 @@ enum {
>               .intr_cfg_reg = 0,                      \
>               .intr_status_reg = 0,                   \
>               .intr_target_reg = 0,                   \
> +             .tile = NORTH,                          \
>               .mux_bit = -1,                          \
>               .pull_bit = pull,                       \
>               .drv_bit = drv,                         \
> @@ -1397,13 +1399,13 @@ static const struct msm_pingroup sdm660_groups[] = {
>       PINGROUP(111, SOUTH, _, _, _, _, _, _, _, _, _),
>       PINGROUP(112, SOUTH, _, _, _, _, _, _, _, _, _),
>       PINGROUP(113, SOUTH, _, _, _, _, _, _, _, _, _),
> -     SDC_QDSD_PINGROUP(sdc1_clk, 0x99a000, 13, 6),
> -     SDC_QDSD_PINGROUP(sdc1_cmd, 0x99a000, 11, 3),
> -     SDC_QDSD_PINGROUP(sdc1_data, 0x99a000, 9, 0),
> -     SDC_QDSD_PINGROUP(sdc2_clk, 0x99b000, 14, 6),
> -     SDC_QDSD_PINGROUP(sdc2_cmd, 0x99b000, 11, 3),
> -     SDC_QDSD_PINGROUP(sdc2_data, 0x99b000, 9, 0),
> -     SDC_QDSD_PINGROUP(sdc1_rclk, 0x99a000, 15, 0),
> +     SDC_QDSD_PINGROUP(sdc1_clk, 0x9a000, 13, 6),
> +     SDC_QDSD_PINGROUP(sdc1_cmd, 0x9a000, 11, 3),
> +     SDC_QDSD_PINGROUP(sdc1_data, 0x9a000, 9, 0),
> +     SDC_QDSD_PINGROUP(sdc2_clk, 0x9b000, 14, 6),
> +     SDC_QDSD_PINGROUP(sdc2_cmd, 0x9b000, 11, 3),
> +     SDC_QDSD_PINGROUP(sdc2_data, 0x9b000, 9, 0),
> +     SDC_QDSD_PINGROUP(sdc1_rclk, 0x9a000, 15, 0),
>  };
>  
>  static const struct msm_pinctrl_soc_data sdm660_pinctrl = {
> -- 
> 2.19.1
> 

Reply via email to