From: Heiko Stuebner <heiko.stueb...@bq.com>

The bq24196 is another variant of the bq24190 charger ic.
Its register set is identical to the bq24192 and it even reuses
the same part number (0x5).

Signed-off-by: Heiko Stuebner <heiko.stueb...@bq.com>
---
This should go on top of the bq24192 support patches from Brian Masney /
Jonathan Marek [0]

[0] https://patchwork.kernel.org/patch/10663409/

changes in v2:
- add missing compatible to dt-binding

 Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
 drivers/power/supply/bq24190_charger.c                     | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt 
b/Documentation/devicetree/bindings/power/supply/bq24190.txt
index c8ac028bd3c7..ffe2be408bb6 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
@@ -5,6 +5,7 @@ Required properties:
     * "ti,bq24190"
     * "ti,bq24192"
     * "ti,bq24192i"
+    * "ti,bq24196"
 - reg: integer, I2C address of the charger.
 - interrupts[-extended]: configuration for charger INT pin.
 
diff --git a/drivers/power/supply/bq24190_charger.c 
b/drivers/power/supply/bq24190_charger.c
index 4e64e6ac95c5..effa7c3c21e6 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -143,7 +143,7 @@
 #define BQ24190_REG_VPRS_PN_MASK               (BIT(5) | BIT(4) | BIT(3))
 #define BQ24190_REG_VPRS_PN_SHIFT              3
 #define BQ24190_REG_VPRS_PN_24190                      0x4
-#define BQ24190_REG_VPRS_PN_24192                      0x5 /* Also 24193 */
+#define BQ24190_REG_VPRS_PN_24192                      0x5 /* Also 24193, 
24196 */
 #define BQ24190_REG_VPRS_PN_24192I                     0x3
 #define BQ24190_REG_VPRS_TS_PROFILE_MASK       BIT(2)
 #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT      2
@@ -1973,6 +1973,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
        { "bq24190" },
        { "bq24192" },
        { "bq24192i" },
+       { "bq24196" },
        { },
 };
 MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
@@ -1982,6 +1983,7 @@ static const struct of_device_id bq24190_of_match[] = {
        { .compatible = "ti,bq24190", },
        { .compatible = "ti,bq24192", },
        { .compatible = "ti,bq24192i", },
+       { .compatible = "ti,bq24196", },
        { },
 };
 MODULE_DEVICE_TABLE(of, bq24190_of_match);
-- 
2.18.0

Reply via email to