Hi Yogesh,
On 13.11.18 09:22, Yogesh Narayan Gaur wrote:
[...]
>> +
>> +static void fsl_qspi_read_ahb(struct fsl_qspi *q, const struct
>> +spi_mem_op *op) {
>> + /*
>> + * We want to avoid needing to invalidate the cache by issueing
>> + * a reset to the AHB and Serial Flash domain, as this needs
>> + * time. So we change the address on each read to trigger an
>> + * actual read operation on the flash. The actual address for
>> + * the flash memory is set by programming the LUT.
>> + */
> As discussed previously, please go away with this hack and use AHB bus
> invalidation method with smaller timeout value.
>
> I would start doing validation of this patch series from next version onward.
> As you have mentioned in other mail discussion about issue in the break
> condition for function fsl_qspi_readl_poll_tout().
Thank you for your comments. I just sent v5 with some fixes, including
fixed fsl_qspi_readl_poll_tout().
I also removed the hack above and I'm properly resetting the AHB domain
now. I'm using a 1us delay just like in the old driver. In my tests the
performance impact was very small (~2%) and it didn't get better when
using ndelay.
Thanks,
Frieder
