On Wed, 11 Jul 2007, Jiri Kosina wrote:
On Tue, 10 Jul 2007, Jeff Garzik wrote:

Various minor updates. The only thing of note is sk98lin driver removal. Please pull from 'upstream-linus' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-linus

This is probably going to cause a new entry in regressions list, as at least Chris Stromsoe has reported bonding-related problems with skge that don't happen with sklin - http://www.uwsg.indiana.edu/hypermail/linux/kernel/0707.1/1158.html

It's worse than just bonding related. This also causes a reliable hard lockup with skge:

fresno:~# modprobe skge
fresno:~# ip li set eth2 up
fresno:~# ip li set eth2 down
fresno:~# ip li set eth3 up

The server locks up there. Nothing is printed to console and it takes a power cycle to fix the problem.

eth2 and eth3 are both ports on an SK-9844 dual-port card. The test above is with 2.6.22. I've also had it fail with .21.*, .20.*, and several other kernels.

fresno:~# uname -a
Linux fresno 2.6.22 #4 SMP Tue Jul 10 11:38:19 PDT 2007 i686 GNU/Linux

fresno:~# dmesg | grep skge
skge 1.11 addr 0xfebfc000 irq 22 chip Genesis rev 0
skge eth2: addr 00:00:5a:98:ac:8c
skge eth3: addr 00:00:5a:98:ac:8d

fresno:~# lspci -v -s 02:01
02:01.0 Ethernet controller: SysKonnect SK-9872 Gigabit Ethernet Server Adapter 
(SK-NET GE-ZX dual link) (rev 11)
        Subsystem: SysKonnect SK-9844 Gigabit Ethernet Server Adapter (SK-NET 
GE-SX dual link)
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
        Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
        I/O ports at e800 [size=256]
        Expansion ROM at febc0000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 1
        Capabilities: [50] Vital Product Data


-Chris

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to