[PATCH] ARM: dts: imx6sll-evk: add debug LED support

[Anson Huang]

On i.MX6SLL EVK board, there is a debug LED controlled
by MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 pin, add support
for it.

Signed-off-by: Anson Huang <anson.hu...@nxp.com>
---
 arch/arm/boot/dts/imx6sll-evk.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sll-evk.dts 
b/arch/arm/boot/dts/imx6sll-evk.dts
index c8e1155..9c90cbd 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -31,6 +31,18 @@
                status = "okay";
        };
 
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_led>;
+
+               user {
+                       label = "debug";
+                       gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+               };
+       };
+
        reg_usb_otg1_vbus: regulator-otg1-vbus {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
@@ -455,6 +467,12 @@
                >;
        };
 
+       pinctrl_led: ledgrp {
+               fsl,pins = <
+                       MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04       0x17059
+               >;
+       };
+
        pinctrl_pwm1: pmw1grp {
                fsl,pins = <
                        MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
-- 
2.7.4