Add a driver to support COMPHY, a hardware block providing shared
serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and
rely on having an up-to-date firmware.
SATA, PCie and USB3 host mode have been tested successfully with an
ESPRESSObin. SGMII mode cannot be tested with this platform.
Co-Developed-by: Evan Wang <xsw...@marvell.com>
Signed-off-by: Evan Wang <xsw...@marvell.com>
Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
---
drivers/phy/marvell/Kconfig | 10 +
drivers/phy/marvell/Makefile | 1 +
drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 276 +++++++++++++++++++
3 files changed, 287 insertions(+)
create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-comphy.c
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 6fb4b56e4c14..f0c39439f06e 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -21,6 +21,16 @@ config PHY_BERLIN_USB
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
+config PHY_MVEBU_A3700_COMPHY
+ tristate "Marvell A3700 comphy driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF
+ select GENERIC_PHY
+ help
+ This driver allows to control the comphy, a hardware block providing
+ shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be
+ used by various controllers: Ethernet, SATA, USB3, PCIe.
+
config PHY_MVEBU_CP110_COMPHY
tristate "Marvell CP110 comphy driver"
depends on ARCH_MVEBU || COMPILE_TEST
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
index 3975b144f8ec..c13a0c8ab6f0 100644
--- a/drivers/phy/marvell/Makefile
+++ b/drivers/phy/marvell/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o
obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY) += phy-mvebu-cp110-comphy.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
new file mode 100644
index 000000000000..cc815cf55a0c
--- /dev/null
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell
+ *
+ * Authors:
+ * Evan Wang <xsw...@marvell.com>
+ * Miquèl Raynal <miquel.ray...@bootlin.com>
+ *
+ * Inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define MVEBU_A3700_COMPHY_LANES 3
+#define MVEBU_A3700_COMPHY_PORTS 2
+
+/* COMPHY Fast SMC function identifiers */
+#define COMPHY_SIP_POWER_ON 0x82000001
+#define COMPHY_SIP_POWER_OFF 0x82000002
+#define COMPHY_SIP_PLL_LOCK 0x82000003
+
+#define COMPHY_FW_MODE_SATA 0x1
+#define COMPHY_FW_MODE_SGMII 0x2
+#define COMPHY_FW_MODE_HS_SGMII 0x3
+#define COMPHY_FW_MODE_USB3H 0x4
+#define COMPHY_FW_MODE_USB3D 0x5
+#define COMPHY_FW_MODE_PCIE 0x6
+#define COMPHY_FW_MODE_RXAUI 0x7
+#define COMPHY_FW_MODE_XFI 0x8
+#define COMPHY_FW_MODE_SFI 0x9
+#define COMPHY_FW_MODE_USB3 0xa
+
+#define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */
+#define COMPHY_FW_SPEED_2_5G 1
+#define COMPHY_FW_SPEED_3_125G 2 /* SGMII 2.5G */
+#define COMPHY_FW_SPEED_5G 3
+#define COMPHY_FW_SPEED_5_15625G 4 /* XFI 5G */
+#define COMPHY_FW_SPEED_6G 5
+#define COMPHY_FW_SPEED_10_3125G 6 /* XFI 10G */
+#define COMPHY_FW_SPEED_MAX 0x3F
+
+#define COMPHY_FW_MODE(mode) ((mode) << 12)
+#define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) |
\
+ ((idx) << 8) | \
+ ((speed) << 2))
+#define COMPHY_FW_PCIE(mode, idx, speed, width) (COMPHY_FW_NET(mode,
idx, speed) | \
+ ((width) << 18))
+
+struct mvebu_a3700_comphy_conf {
+ unsigned int lane;
+ enum phy_mode mode;
+ unsigned int port;
+ u32 fw_mode;
+};
+
+#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _port, _fw_mode) \
+ { \
+ .lane = _lane, \
+ .mode = _mode, \
+ .port = _port, \
+ .fw_mode = _fw_mode, \
+ }
+
+static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = {
+ /* lane 0 */
+ MVEBU_A3700_COMPHY_CONF(0, PHY_MODE_USB_HOST_SS, 0,
COMPHY_FW_MODE_USB3H),
+ MVEBU_A3700_COMPHY_CONF(0, PHY_MODE_SGMII, 1, COMPHY_FW_MODE_SGMII),
+ /* lane 1 */
+ MVEBU_A3700_COMPHY_CONF(1, PHY_MODE_PCIE, 0, COMPHY_FW_MODE_PCIE),
+ MVEBU_A3700_COMPHY_CONF(1, PHY_MODE_SGMII, 0, COMPHY_FW_MODE_SGMII),
+ /* lane 2 */
+ MVEBU_A3700_COMPHY_CONF(2, PHY_MODE_SATA, 0, COMPHY_FW_MODE_SATA),
+ MVEBU_A3700_COMPHY_CONF(2, PHY_MODE_USB_HOST_SS, 0,
COMPHY_FW_MODE_USB3H),
+};
+
+struct mvebu_a3700_comphy_lane {
+ struct device *dev;
+ unsigned int id;
+ enum phy_mode mode;
+ int port;
+};
+
+static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane,
+ unsigned long mode)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+static int mvebu_a3700_comphy_get_fw_mode(int lane, int port,
+ enum phy_mode mode)
+{
+ int i, n = ARRAY_SIZE(mvebu_a3700_comphy_modes);
+
+ /* Unused PHY mux value is 0x0 */
+ if (mode == PHY_MODE_INVALID)
+ return -EINVAL;
+
+ for (i = 0; i < n; i++) {
+ if (mvebu_a3700_comphy_modes[i].lane == lane &&
+ mvebu_a3700_comphy_modes[i].port == port &&
+ mvebu_a3700_comphy_modes[i].mode == mode)
+ break;
+ }
+
+ if (i == n)
+ return -EINVAL;
+
+ return mvebu_a3700_comphy_modes[i].fw_mode;
+}
+
+static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+ int fw_mode;
+
+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode);
+ if (fw_mode < 0) {
+ dev_err(lane->dev, "invalid COMPHY mode\n");
+ return fw_mode;
+ }
+
+ /* Just remember the mode, ->power_on() will do the real setup */
+ lane->mode = mode;
+
+ return 0;
+}
+
+static int mvebu_a3700_comphy_power_on(struct phy *phy)
+{
+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+ u32 fw_param;
+ int fw_mode;
+
+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port,
+ lane->mode);
+ if (fw_mode < 0) {
+ dev_err(lane->dev, "invalid COMPHY mode\n");
+ return fw_mode;
+ }
+
+ switch (lane->mode) {
+ case PHY_MODE_USB_HOST_SS:
+ dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id);
+ fw_param = COMPHY_FW_MODE(fw_mode);
+ break;
+ case PHY_MODE_SATA:
+ dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id);
+ fw_param = COMPHY_FW_MODE(fw_mode);
+ break;
+ case PHY_MODE_SGMII:
+ dev_dbg(lane->dev, "set lane %d to SGMII mode\n", lane->id);
+ fw_param = COMPHY_FW_NET(fw_mode, lane->port,
+ COMPHY_FW_SPEED_1_25G);
+ break;
+ case PHY_MODE_PCIE:
+ dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id);
+ fw_param = COMPHY_FW_PCIE(fw_mode, lane->port,
+ COMPHY_FW_SPEED_5G,
+ phy->attrs.bus_width);
+ break;
+ default:
+ dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode);
+ return -ENOTSUPP;
+ }
+
+ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
+}
+
+static int mvebu_a3700_comphy_power_off(struct phy *phy)
+{
+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+
+ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0);
+}
+
+static const struct phy_ops mvebu_a3700_comphy_ops = {
+ .power_on = mvebu_a3700_comphy_power_on,
+ .power_off = mvebu_a3700_comphy_power_off,
+ .set_mode = mvebu_a3700_comphy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *mvebu_a3700_comphy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct mvebu_a3700_comphy_lane *lane;
+ struct phy *phy;
+
+ if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS))
+ return ERR_PTR(-EINVAL);
+
+ phy = of_phy_simple_xlate(dev, args);
+ if (IS_ERR(phy))
+ return phy;
+
+ lane = phy_get_drvdata(phy);
+ if (lane->port >= 0)
+ return ERR_PTR(-EBUSY);
+
+ lane->port = args->args[0];
+
+ return phy;
+}
+
+static int mvebu_a3700_comphy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *provider;
+ struct device_node *child;
+
+ for_each_available_child_of_node(pdev->dev.of_node, child) {
+ struct mvebu_a3700_comphy_lane *lane;
+ struct phy *phy;
+ int ret;
+ u32 lane_id;
+
+ ret = of_property_read_u32(child, "reg", &lane_id);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "missing 'reg' property (%d)\n",
+ ret);
+ continue;
+ }
+
+ if (lane_id >= MVEBU_A3700_COMPHY_LANES) {
+ dev_err(&pdev->dev, "invalid 'reg' property\n");
+ continue;
+ }
+
+ lane = devm_kzalloc(&pdev->dev, sizeof(*lane), GFP_KERNEL);
+ if (!lane)
+ return -ENOMEM;
+
+ phy = devm_phy_create(&pdev->dev, child,
+ &mvebu_a3700_comphy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ lane->dev = &pdev->dev;
+ lane->mode = PHY_MODE_INVALID;
+ lane->id = lane_id;
+ lane->port = -1;
+ phy_set_drvdata(phy, lane);
+ }
+
+ provider = devm_of_phy_provider_register(&pdev->dev,
+ mvebu_a3700_comphy_xlate);
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id mvebu_a3700_comphy_of_match_table[] = {
+ { .compatible = "marvell,comphy-a3700" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mvebu_a3700_comphy_of_match_table);
+
+static struct platform_driver mvebu_a3700_comphy_driver = {
+ .probe = mvebu_a3700_comphy_probe,
+ .driver = {
+ .name = "mvebu-a3700-comphy",
+ .of_match_table = mvebu_a3700_comphy_of_match_table,
+ },
+};
+module_platform_driver(mvebu_a3700_comphy_driver);
+
+MODULE_AUTHOR("Miquèl Raynal <miquel.ray...@bootlin.com>");
+MODULE_DESCRIPTION("Common PHY driver for A3700");
+MODULE_LICENSE("GPL v2");
--
2.19.1
