On Tue, 20 Nov 2018 22:24:36 +0530
Shreeya Patel <shreeya.patel23...@gmail.com> wrote:
> Make the driver use device tree instead of the platform data.
> Hence, use devm_gpiod_get_optional function to get the data from
> device tree for ldac-pin and accordingly make the needed changes
> in the driver.
>
> Signed-off-by: Shreeya Patel <shreeya.patel23...@gmail.com>
Sorry, missed this previously. This is definitely a non standard
gpio name, so should be prefixed in the binding and here with
adi,
I'll fix up, but please check I didn't mess it up!
Applied with that change to the togreg branch of iio.git.
Thanks,
Jonathan
> ---
> drivers/staging/iio/addac/adt7316.c | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/staging/iio/addac/adt7316.c
> b/drivers/staging/iio/addac/adt7316.c
> index 3f22d1088713..deb2f7b40f60 100644
> --- a/drivers/staging/iio/addac/adt7316.c
> +++ b/drivers/staging/iio/addac/adt7316.c
> @@ -177,7 +177,7 @@
>
> struct adt7316_chip_info {
> struct adt7316_bus bus;
> - u16 ldac_pin;
> + struct gpio_desc *ldac_pin;
> u16 int_mask; /* 0x2f */
> u8 config1;
> u8 config2;
> @@ -950,8 +950,8 @@ static ssize_t adt7316_store_update_DAC(struct device
> *dev,
> if (ret)
> return -EIO;
> } else {
> - gpio_set_value(chip->ldac_pin, 0);
> - gpio_set_value(chip->ldac_pin, 1);
> + gpiod_set_value(chip->ldac_pin, 0);
> + gpiod_set_value(chip->ldac_pin, 1);
> }
>
> return len;
> @@ -2120,7 +2120,13 @@ int adt7316_probe(struct device *dev, struct
> adt7316_bus *bus,
> else
> return -ENODEV;
>
> - chip->ldac_pin = adt7316_platform_data[1];
> + chip->ldac_pin = devm_gpiod_get_optional(dev, "ldac", GPIOD_OUT_LOW);
> + if (IS_ERR(chip->ldac_pin)) {
> + ret = PTR_ERR(chip->ldac_pin);
> + dev_err(dev, "Failed to request ldac GPIO: %d\n", ret);
> + return ret;
> + }
> +
> if (chip->ldac_pin) {
> chip->config3 |= ADT7316_DA_EN_VIA_DAC_LDCA;
> if ((chip->id & ID_FAMILY_MASK) == ID_ADT75XX)
