Add slave mode support to the fsl-lpspi driver, only in PIO mode.
For now, there are some limitations for slave mode transmission, which
have been mentioned in cover-letter.
Signed-off-by: Clark Wang <xiaoning.w...@nxp.com>
---
Change log:
V2:
- No change.
---
drivers/spi/spi-fsl-lpspi.c | 107 ++++++++++++++++++++++++++----------
1 file changed, 79 insertions(+), 28 deletions(-)
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 725d6ac5f814..cbf165e7bd17 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -55,6 +55,7 @@
#define IER_RDIE BIT(1)
#define IER_TDIE BIT(0)
#define CFGR1_PCSCFG BIT(27)
+#define CFGR1_PINCFG (BIT(24)|BIT(25))
#define CFGR1_PCSPOL BIT(8)
#define CFGR1_NOSTALL BIT(3)
#define CFGR1_MASTER BIT(0)
@@ -80,6 +81,7 @@ struct fsl_lpspi_data {
struct device *dev;
void __iomem *base;
struct clk *clk;
+ bool is_slave;
void *rx_buf;
const void *tx_buf;
@@ -92,6 +94,8 @@ struct fsl_lpspi_data {
struct lpspi_config config;
struct completion xfer_done;
+
+ bool slave_aborted;
};
static const struct of_device_id fsl_lpspi_dt_ids[] = {
@@ -206,21 +210,22 @@ static void fsl_lpspi_set_cmd(struct fsl_lpspi_data
*fsl_lpspi,
u32 temp = 0;
temp |= fsl_lpspi->config.bpw - 1;
- temp |= fsl_lpspi->config.prescale << 27;
temp |= (fsl_lpspi->config.mode & 0x3) << 30;
- temp |= (fsl_lpspi->config.chip_select & 0x3) << 24;
-
- /*
- * Set TCR_CONT will keep SS asserted after current transfer.
- * For the first transfer, clear TCR_CONTC to assert SS.
- * For subsequent transfer, set TCR_CONTC to keep SS asserted.
- */
- temp |= TCR_CONT;
- if (is_first_xfer)
- temp &= ~TCR_CONTC;
- else
- temp |= TCR_CONTC;
-
+ if (!fsl_lpspi->is_slave) {
+ temp |= fsl_lpspi->config.prescale << 27;
+ temp |= (fsl_lpspi->config.chip_select & 0x3) << 24;
+
+ /*
+ * Set TCR_CONT will keep SS asserted after current transfer.
+ * For the first transfer, clear TCR_CONTC to assert SS.
+ * For subsequent transfer, set TCR_CONTC to keep SS asserted.
+ */
+ temp |= TCR_CONT;
+ if (is_first_xfer)
+ temp &= ~TCR_CONTC;
+ else
+ temp |= TCR_CONTC;
+ }
writel(temp, fsl_lpspi->base + IMX7ULP_TCR);
dev_dbg(fsl_lpspi->dev, "TCR=0x%x\n", temp);
@@ -273,13 +278,18 @@ static int fsl_lpspi_config(struct fsl_lpspi_data
*fsl_lpspi)
writel(temp, fsl_lpspi->base + IMX7ULP_CR);
writel(0, fsl_lpspi->base + IMX7ULP_CR);
- ret = fsl_lpspi_set_bitrate(fsl_lpspi);
- if (ret)
- return ret;
+ if (!fsl_lpspi->is_slave) {
+ ret = fsl_lpspi_set_bitrate(fsl_lpspi);
+ if (ret)
+ return ret;
+ }
fsl_lpspi_set_watermark(fsl_lpspi);
- temp = CFGR1_PCSCFG | CFGR1_MASTER;
+ if (!fsl_lpspi->is_slave)
+ temp = CFGR1_MASTER;
+ else
+ temp = CFGR1_PINCFG;
if (fsl_lpspi->config.mode & SPI_CS_HIGH)
temp |= CFGR1_PCSPOL;
writel(temp, fsl_lpspi->base + IMX7ULP_CFGR1);
@@ -322,6 +332,37 @@ static void fsl_lpspi_setup_transfer(struct spi_device
*spi,
fsl_lpspi_config(fsl_lpspi);
}
+static int fsl_lpspi_slave_abort(struct spi_controller *controller)
+{
+ struct fsl_lpspi_data *fsl_lpspi =
+ spi_controller_get_devdata(controller);
+
+ fsl_lpspi->slave_aborted = true;
+ complete(&fsl_lpspi->xfer_done);
+ return 0;
+}
+
+static int fsl_lpspi_wait_for_completion(struct spi_controller *controller)
+{
+ struct fsl_lpspi_data *fsl_lpspi =
+ spi_controller_get_devdata(controller);
+
+ if (fsl_lpspi->is_slave) {
+ if (wait_for_completion_interruptible(&fsl_lpspi->xfer_done) ||
+ fsl_lpspi->slave_aborted) {
+ dev_dbg(fsl_lpspi->dev, "interrupted\n");
+ return -EINTR;
+ }
+ } else {
+ if (!wait_for_completion_timeout(&fsl_lpspi->xfer_done, HZ)) {
+ dev_dbg(fsl_lpspi->dev, "wait for completion
timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
static int fsl_lpspi_transfer_one(struct spi_controller *controller,
struct spi_device *spi,
struct spi_transfer *t)
@@ -335,13 +376,13 @@ static int fsl_lpspi_transfer_one(struct spi_controller
*controller,
fsl_lpspi->remain = t->len;
reinit_completion(&fsl_lpspi->xfer_done);
+ fsl_lpspi->slave_aborted = false;
+
fsl_lpspi_write_tx_fifo(fsl_lpspi);
- ret = wait_for_completion_timeout(&fsl_lpspi->xfer_done, HZ);
- if (!ret) {
- dev_dbg(fsl_lpspi->dev, "wait for completion timeout\n");
- return -ETIMEDOUT;
- }
+ ret = fsl_lpspi_wait_for_completion(controller);
+ if (ret)
+ return ret;
ret = fsl_lpspi_txfifo_empty(fsl_lpspi);
if (ret)
@@ -380,10 +421,12 @@ static int fsl_lpspi_transfer_one_msg(struct
spi_controller *controller,
}
complete:
- /* de-assert SS, then finalize current message */
- temp = readl(fsl_lpspi->base + IMX7ULP_TCR);
- temp &= ~TCR_CONTC;
- writel(temp, fsl_lpspi->base + IMX7ULP_TCR);
+ if (!fsl_lpspi->is_slave) {
+ /* de-assert SS, then finalize current message */
+ temp = readl(fsl_lpspi->base + IMX7ULP_TCR);
+ temp &= ~TCR_CONTC;
+ writel(temp, fsl_lpspi->base + IMX7ULP_TCR);
+ }
msg->status = ret;
spi_finalize_current_message(controller);
@@ -421,8 +464,13 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
int ret, irq;
u32 temp;
- controller = spi_alloc_master(&pdev->dev,
+ if (of_property_read_bool((&pdev->dev)->of_node, "spi-slave"))
+ controller = spi_alloc_slave(&pdev->dev,
+ sizeof(struct fsl_lpspi_data));
+ else
+ controller = spi_alloc_master(&pdev->dev,
sizeof(struct fsl_lpspi_data));
+
if (!controller)
return -ENOMEM;
@@ -433,6 +481,8 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
fsl_lpspi = spi_controller_get_devdata(controller);
fsl_lpspi->dev = &pdev->dev;
+ fsl_lpspi->is_slave = of_property_read_bool((&pdev->dev)->of_node,
+ "spi-slave");
controller->transfer_one_message = fsl_lpspi_transfer_one_msg;
controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware;
@@ -441,6 +491,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
controller->dev.of_node = pdev->dev.of_node;
controller->bus_num = pdev->id;
+ controller->slave_abort = fsl_lpspi_slave_abort;
init_completion(&fsl_lpspi->xfer_done);
--
2.17.1
