[PATCH 5/9] ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIO

[Otavio Salvador]

From: Fabio Estevam <feste...@gmail.com>

Pass the "phy-reset-gpios" property in order to describe the GPIO
that performs the Ethernet PHY reset.

Signed-off-by: Fabio Estevam <feste...@gmail.com>
Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---

 arch/arm/boot/dts/imx7d-pico.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi 
b/arch/arm/boot/dts/imx7d-pico.dtsi
index cb30bded1e4a..35791a1adabf 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -88,6 +88,7 @@
        phy-mode = "rgmii";
        phy-handle = <&ethphy0>;
        fsl,magic-packet;
+       phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
        status = "okay";
 
        mdio {
@@ -290,6 +291,7 @@
                        MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2       0x1
                        MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3       0x1
                        MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+                       MX7D_PAD_SD3_RESET_B__GPIO6_IO11                0x1  /* 
Ethernet reset */
                >;
        };
 
-- 
2.19.2