"make ARCH=microblaze help" mentions simpleImage.<dt>.unstrip, but it never works because Makefile assumes "system.unstrip" is the name of DT.
$ make ARCH=microblaze CROSS_COMPILE=microblaze-linux- simpleImage.system.unstrip [ snip ] make[1]: *** No rule to make target 'arch/microblaze/boot/dts/system.unstrip.dtb', needed by 'arch/microblaze/boot/dts/system.dtb'. Stop. make: *** [Makefile;1060: arch/microblaze/boot/dts] Error 2 make: *** Waiting for unfinished jobs.... Rip off the never-working target. In my understanding, simpleImage.<dt> works like a phony target that generates multiple images. Reflect the behavior to the help message. Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com> --- arch/microblaze/Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 0823d29..97e1384 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -89,9 +89,7 @@ define archhelp echo '* linux.bin - Create raw binary' echo ' linux.bin.gz - Create compressed raw binary' echo ' linux.bin.ub - Create U-Boot wrapped raw binary' - echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in' - echo ' - stripped elf with fdt blob' - echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob' + echo ' simpleImage.<dt> - Create images with $(arch)/boot/dts/<dt>.dts linked in' echo ' *_defconfig - Select default config from arch/microblaze/configs' echo '' echo ' Targets with <dt> embed a device tree blob inside the image' -- 2.7.4
