Hello!
On 03.12.2018 6:45, Yu Chen wrote:
This patch adds binding descriptions to support the dwc3 controller
on HiSilicon SoCs and boards like the HiKey960.
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
Cc: Rob Herring <robh...@kernel.org>
Cc: Mark Rutland <mark.rutl...@arm.com>
Cc: John Stultz <john.stu...@linaro.org>
Signed-off-by: Yu Chen <cheny...@huawei.com>
---
.../devicetree/bindings/usb/dwc3-hisi.txt | 67 ++++++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/dwc3-hisi.txt
diff --git a/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
b/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
new file mode 100644
index 000000000000..d32d2299a0a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
@@ -0,0 +1,67 @@
+HiSilicon DWC3 USB SoC controller
+
+This file documents the parameters for the dwc3-hisi driver.
+
+Required properties:
+- compatible: should be "hisilicon,hi3660-dwc3"
+- clocks: A list of phandle + clock-specifier pairs for the
+ clocks listed in clock-names
+- clock-names: Specify clock names
+- resets: list of phandle and reset specifier pairs.
+
+Sub-nodes:
+The dwc3 core should be added as subnode to HiSilicon DWC3 as shown in the
+example below. The DT binding details of dwc3 can be found in:
+Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+ usb3: hisi_dwc3 {
+ compatible = "hisilicon,hi3660-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+ <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+ assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ assigned-clock-rates = <229000000>;
+ resets = <&crg_rst 0x90 8>,
+ <&crg_rst 0x90 7>,
+ <&crg_rst 0x90 6>,
+ <&crg_rst 0x90 5>;
+
+ dwc3: dwc3@ff100000 {
According to the DT spec, the node names should be generic, not chip
specific, i.e. usb@ff100000 in this case.
[...]
MBR, Sergei
