Hi, On Wed, Oct 31, 2018 at 08:11:43PM -0400, Brian Masney wrote: > Add support for the ti,bq24192 variant and a child node for the > usb-otg-vbus regulator. > > Signed-off-by: Brian Masney <masn...@onstation.org> > ---
Thanks, queued.
-- Sebastian
> .../devicetree/bindings/power/supply/bq24190.txt | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt
> b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> index 9e517d307070..c8ac028bd3c7 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
> +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> @@ -3,6 +3,7 @@ TI BQ24190 Li-Ion Battery Charger
> Required properties:
> - compatible: contains one of the following:
> * "ti,bq24190"
> + * "ti,bq24192"
> * "ti,bq24192i"
> - reg: integer, I2C address of the charger.
> - interrupts[-extended]: configuration for charger INT pin.
> @@ -19,6 +20,12 @@ Optional properties:
> - ti,system-minimum-microvolt: when power is connected and the battery is
> below
> minimum system voltage, the system will be regulated above this setting.
>
> +child nodes:
> +- usb-otg-vbus:
> + Usage: optional
> + Description: Regulator that is used to control the VBUS voltage direction
> for
> + either USB host mode or for charging on the OTG port.
> +
> Notes:
> - Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default
> charge current on USB SDP ports, among other features). To simulate this on
> @@ -39,6 +46,8 @@ Example:
> interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>;
> monitored-battery = <&bat>;
> ti,system-minimum-microvolt = <3200000>;
> +
> + usb_otg_vbus: usb-otg-vbus { };
> };
>
> &twl_gpio {
> --
> 2.17.2
>
signature.asc
Description: PGP signature
