4.19-stable review patch. If anyone has any objections, please let me know.
------------------ From: Martin Wilck <[email protected]> commit dfb7513374c1f8e7cd595106fbdba3fd07ebaf30 upstream. Since f44ac12f1dcc, BG enablement is tracked with the LPFC_SLI3_BG_ENABLED bit, which is set in lpfc_get_cfgparam before lpfc_sli_config_sli_port() is called. The bit shouldn't be cleared before checking the feature. Based on problem analysis by David Bond. Fixes: f44ac12f1dcc "scsi: lpfc: Memory allocation error during driver start-up on power8" Tested-by: David Bond <[email protected]> Signed-off-by: Martin Wilck <[email protected]> Cc: [email protected] # 4.17.x Cc: [email protected] # 4.18.x Cc: [email protected] # 4.19.x Reviewed-by: Hannes Reinecke <[email protected]> Acked-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/scsi/lpfc/lpfc_init.c | 6 +++++- drivers/scsi/lpfc/lpfc_sli.c | 1 - 2 files changed, 5 insertions(+), 2 deletions(-) --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -167,7 +167,11 @@ lpfc_config_port_prep(struct lpfc_hba *p sizeof(phba->wwpn)); } - phba->sli3_options = 0x0; + /* + * Clear all option bits except LPFC_SLI3_BG_ENABLED, + * which was already set in lpfc_get_cfgparam() + */ + phba->sli3_options &= (uint32_t)LPFC_SLI3_BG_ENABLED; /* Setup and issue mailbox READ REV command */ lpfc_read_rev(phba, pmb); --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4969,7 +4969,6 @@ lpfc_sli_config_port(struct lpfc_hba *ph phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED | LPFC_SLI3_CRP_ENABLED | - LPFC_SLI3_BG_ENABLED | LPFC_SLI3_DSS_ENABLED); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
