On 10:56-20181208, Vignesh R wrote: > > > On 07/12/18 2:12 PM, Faiz Abbas wrote: > > There are two MMC host controller instances present on the TI's > > Am654 SOCs. Add device tree nodes for the same. > > > > Signed-off-by: Faiz Abbas <[email protected]> > > --- > > arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 28 ++++++++++++++++++++++++ > > 1 file changed, 28 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > > b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > > index 916434839603..d07212f16a81 100644 > > --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > > +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > > @@ -129,4 +129,32 @@ > > clocks = <&k3_clks 113 1>; > > power-domains = <&k3_pds 113>; > > }; > > + > > + sdhci0: sdhci@4f80000 { > > + compatible = "ti,am654-sdhci-5.1"; > > + reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; > > + power-domains = <&k3_pds 47>; > > + clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; > > + clock-names = "clk_ahb", "clk_xin"; > > + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > > + sdhci-caps-mask = <0x80000007 0x0>; > > + mmc-ddr-1_8v; > > + ti,otap-del-sel = <0x2>; > > + ti,trm-icp = <0x8>; > > + status = "disabled"; > > + }; > > Please drop "status=disabled" from dtsi. Can be disabled as required in > the board dts.
yes - the standard in k3 is to disable the nodes that are'nt needed in board.dtsi. This is different from "disabled by default" approach in DRA7 or OMAP4 for example. -- Regards, Nishanth Menon
