The light sensor's power supply could be controlled by regulator on some platforms, such as i.MX6Q-SABRESD board, the light sensor isl29023's power supply is controlled by a GPIO fixed regulator, need to make sure the regulator is enabled before any operation of sensor, this patch adds optional vdd/vdda regulator operation support.
Signed-off-by: Anson Huang <anson.hu...@nxp.com> --- ChangeLog since V3: - improve the error handling of devm_regulator_get_optional; - make sure regulators are disabled in error path. --- drivers/iio/light/isl29018.c | 83 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 80 insertions(+), 3 deletions(-) diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c index b45400f..a21652b 100644 --- a/drivers/iio/light/isl29018.c +++ b/drivers/iio/light/isl29018.c @@ -23,6 +23,7 @@ #include <linux/mutex.h> #include <linux/delay.h> #include <linux/regmap.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -95,6 +96,8 @@ struct isl29018_chip { struct isl29018_scale scale; int prox_scheme; bool suspended; + struct regulator *vdd_reg; + struct regulator *vdda_reg; }; static int isl29018_set_integration_time(struct isl29018_chip *chip, @@ -735,6 +738,34 @@ static int isl29018_probe(struct i2c_client *client, mutex_init(&chip->lock); + chip->vdd_reg = devm_regulator_get_optional(&client->dev, "vdd"); + if (!IS_ERR(chip->vdd_reg)) { + err = regulator_enable(chip->vdd_reg); + if (err) { + dev_err(&client->dev, "failed to enable VDD regulator\n"); + return err; + } + } else { + err = PTR_ERR(chip->vdd_reg); + if (err != -ENODEV) + return err; + } + + chip->vdda_reg = devm_regulator_get_optional(&client->dev, "vdda"); + if (!IS_ERR(chip->vdda_reg)) { + err = regulator_enable(chip->vdda_reg); + if (err) { + dev_err(&client->dev, "failed to enable VDDA regulator\n"); + if (!IS_ERR(chip->vdd_reg)) + regulator_disable(chip->vdd_reg); + return err; + } + } else { + err = PTR_ERR(chip->vdda_reg); + if (err != -ENODEV) + return err; + } + chip->type = dev_id; chip->calibscale = 1; chip->ucalibscale = 0; @@ -747,12 +778,12 @@ static int isl29018_probe(struct i2c_client *client, if (IS_ERR(chip->regmap)) { err = PTR_ERR(chip->regmap); dev_err(&client->dev, "regmap initialization fails: %d\n", err); - return err; + goto disable_regulators; } err = isl29018_chip_init(chip); if (err) - return err; + goto disable_regulators; indio_dev->info = isl29018_chip_info_tbl[dev_id].indio_info; indio_dev->channels = isl29018_chip_info_tbl[dev_id].channels; @@ -761,13 +792,24 @@ static int isl29018_probe(struct i2c_client *client, indio_dev->dev.parent = &client->dev; indio_dev->modes = INDIO_DIRECT_MODE; - return devm_iio_device_register(&client->dev, indio_dev); + err = devm_iio_device_register(&client->dev, indio_dev); + if (!err) + return 0; + +disable_regulators: + if (!IS_ERR(chip->vdd_reg)) + regulator_disable(chip->vdd_reg); + if (!IS_ERR(chip->vdda_reg)) + regulator_disable(chip->vdda_reg); + + return err; } #ifdef CONFIG_PM_SLEEP static int isl29018_suspend(struct device *dev) { struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev)); + int ret; mutex_lock(&chip->lock); @@ -777,6 +819,22 @@ static int isl29018_suspend(struct device *dev) * So we do not have much to do here. */ chip->suspended = true; + if (!IS_ERR(chip->vdd_reg)) { + ret = regulator_disable(chip->vdd_reg); + if (ret) { + dev_err(dev, "failed to disable VDD regulator\n"); + mutex_unlock(&chip->lock); + return ret; + } + } + if (!IS_ERR(chip->vdda_reg)) { + ret = regulator_disable(chip->vdda_reg); + if (ret) { + dev_err(dev, "failed to disable VDDA regulator\n"); + mutex_unlock(&chip->lock); + return ret; + } + } mutex_unlock(&chip->lock); @@ -790,6 +848,25 @@ static int isl29018_resume(struct device *dev) mutex_lock(&chip->lock); + if (!IS_ERR(chip->vdd_reg)) { + err = regulator_enable(chip->vdd_reg); + if (err) { + dev_err(dev, "failed to enable VDD regulator\n"); + mutex_unlock(&chip->lock); + return err; + } + } + if (!IS_ERR(chip->vdda_reg)) { + err = regulator_enable(chip->vdda_reg); + if (err) { + dev_err(dev, "failed to enable VDDA regulator\n"); + if (!IS_ERR(chip->vdd_reg)) + regulator_disable(chip->vdd_reg); + mutex_unlock(&chip->lock); + return err; + } + } + err = isl29018_chip_init(chip); if (!err) chip->suspended = false; -- 2.7.4