On Tue, 2018-12-11 at 21:20 +0100, Wolfram Sang wrote:
> On Mon, Dec 03, 2018 at 09:32:51PM +0800, qii.w...@mediatek.com wrote:
> > From: qii wang <qii.w...@mediatek.com>
> >
> > Completion_done is useless when we don't use its return value,
> > so we remove it. Different speeds have been defined by macros,
> > so we use macros definitions.
>
> Those are two seperate patches, or?
>
These two changes are relatively small, but it seems better to be
divided into two seperate patches.
> >
> > Signed-off-by: qii wang <qii.w...@mediatek.com>
> > ---
> > drivers/i2c/busses/i2c-mt65xx.c | 6 ++----
> > 1 file changed, 2 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-mt65xx.c
> > b/drivers/i2c/busses/i2c-mt65xx.c
> > index a74ef76..660de1e 100644
> > --- a/drivers/i2c/busses/i2c-mt65xx.c
> > +++ b/drivers/i2c/busses/i2c-mt65xx.c
> > @@ -456,7 +456,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c,
> > struct i2c_msg *msgs,
> >
> > control_reg = readw(i2c->base + OFFSET_CONTROL) &
> > ~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
> > - if ((i2c->speed_hz > 400000) || (left_num >= 1))
> > + if ((i2c->speed_hz > MAX_FS_MODE_SPEED) || (left_num >= 1))
> > control_reg |= I2C_CONTROL_RS;
> >
> > if (i2c->op == I2C_MASTER_WRRD)
> > @@ -465,7 +465,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c,
> > struct i2c_msg *msgs,
> > writew(control_reg, i2c->base + OFFSET_CONTROL);
> >
> > /* set start condition */
> > - if (i2c->speed_hz <= 100000)
> > + if (i2c->speed_hz <= I2C_DEFAULT_SPEED)
> > writew(I2C_ST_START_CON, i2c->base + OFFSET_EXT_CONF);
> > else
> > writew(I2C_FS_START_CON, i2c->base + OFFSET_EXT_CONF);
> > @@ -642,8 +642,6 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c,
> > struct i2c_msg *msgs,
> > return -ETIMEDOUT;
> > }
> >
> > - completion_done(&i2c->msg_complete);
> > -
> > if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) {
> > dev_dbg(i2c->dev, "addr: %x, transfer ACK error\n", msgs->addr);
> > mtk_i2c_init_hw(i2c);
> > --
> > 1.7.9.5
> >
