On Fri, Nov 23, 2018 at 01:18:38PM +0100, Thierry Reding wrote:
> From: Thierry Reding <[email protected]>
> 
> The NVIDIA Tegra194 SoC defines six thermal zones. Define all of them in
> device tree.
> 
> Signed-off-by: Thierry Reding <[email protected]>

Acked-by: Eduardo Valentin <[email protected]>

The patch 1 I added in my -linus branch.

> ---
>  arch/arm64/boot/dts/nvidia/tegra194.dtsi | 39 ++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi 
> b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> index cbba7395a286..39169f6b6166 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> @@ -5,6 +5,7 @@
>  #include <dt-bindings/mailbox/tegra186-hsp.h>
>  #include <dt-bindings/reset/tegra194-reset.h>
>  #include <dt-bindings/power/tegra194-powergate.h>
> +#include <dt-bindings/thermal/tegra194-bpmp-thermal.h>
>  
>  / {
>       compatible = "nvidia,tegra194";
> @@ -938,6 +939,44 @@
>               mbox-names = "rx", "tx";
>       };
>  
> +     thermal-zones {
> +             cpu {
> +                     thermal-sensors = <&{/bpmp/thermal}
> +                                        TEGRA194_BPMP_THERMAL_ZONE_CPU>;
> +                     status = "disabled";
> +             };
> +
> +             gpu {
> +                     thermal-sensors = <&{/bpmp/thermal}
> +                                        TEGRA194_BPMP_THERMAL_ZONE_GPU>;
> +                     status = "disabled";
> +             };
> +
> +             aux {
> +                     thermal-sensors = <&{/bpmp/thermal}
> +                                        TEGRA194_BPMP_THERMAL_ZONE_AUX>;
> +                     status = "disabled";
> +             };
> +
> +             pllx {
> +                     thermal-sensors = <&{/bpmp/thermal}
> +                                        TEGRA194_BPMP_THERMAL_ZONE_PLLX>;
> +                     status = "disabled";
> +             };
> +
> +             ao {
> +                     thermal-sensors = <&{/bpmp/thermal}
> +                                        TEGRA194_BPMP_THERMAL_ZONE_AO>;
> +                     status = "disabled";
> +             };
> +
> +             tj {
> +                     thermal-sensors = <&{/bpmp/thermal}
> +                                        TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX>;
> +                     status = "disabled";
> +             };
> +     };
> +
>       timer {
>               compatible = "arm,armv8-timer";
>               interrupts = <GIC_PPI 13

Reply via email to