Hi Rob,
Thanks for the review!
On 2018-12-18 22:57, Rob Herring wrote:
On Mon, Dec 17, 2018 at 03:37:19PM +0530, Sibi Sankar wrote:
Add missing clock bindings for Q6V5 MSS on SDM845 SoCs.
Signed-off-by: Sibi Sankar <si...@codeaurora.org>
---
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 10
+++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git
a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 9ff5b0309417..780adc043b37 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -39,13 +39,17 @@ on the Qualcomm Hexagon core.
- clocks:
Usage: required
Value type: <phandle>
- Definition: reference to the iface, bus and mem clocks to be held on
- behalf of the booting of the Hexagon core
+ Definition: reference to the list of 4 clocks for the modem
sub-system
+ reference to the list of 8 clocks for the modem sub-system
+ on SDM845 SoCs
- clock-names:
Usage: required
Value type: <stringlist>
- Definition: must be "iface", "bus", "mem"
+ Definition: must be "iface", "bus", "mem", "xo" for the modem
sub-system
+ must be "iface", "bus", "mem", "gpll0_mss", "snoc_axi",
+ "mnoc_axi", "prng", "xo" for the modem sub-system on SDM845
+ SoCs
This seems to me a list of all clocks you need enabled, not what clocks
actually go to the modem. Specifically, shouldn't the *noc_axi clocks
be
managed by the interconnect driver?
clocks = ...,
<&gcc GCC_MSS_SNOC_AXI_CLK>,
<&gcc GCC_MSS_MFAB_AXIS_CLK>,
...;
clock-names = ..., "snoc_axi", "mnoc_axi",...;
snoc_axi and mnoc_axi maps to above GCC clks and
both of them fall under the MSS functional group
Rob
--
-- Sibi Sankar --
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
