On Wed, Dec 19, 2018 at 3:37 PM Maxime Ripard <maxime.rip...@bootlin.com> wrote: > > On Tue, Dec 18, 2018 at 09:08:17PM +0530, Jagan Teki wrote: > > On Tue, Dec 18, 2018 at 8:53 PM Maxime Ripard <maxime.rip...@bootlin.com> > > wrote: > > > > > > On Tue, Dec 18, 2018 at 05:03:17PM +0530, Jagan Teki wrote: > > > > Unfortunately A64 CSI cannot work with default CSI_SCLK rate. > > > > > > > > A64 BSP is using 300MHz clock rate as default csi clock, > > > > so sun6i_csi require explicit change to update CSI_SCLK > > > > rate to 300MHZ for A64 SoC's. > > > > > > > > So, set the clk_mod to 300MHz only for A64. > > > > > > > > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > > > > --- > > > > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 5 +++++ > > > > 1 file changed, 5 insertions(+) > > > > > > > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > > > > b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > > > > index 9ff61896e4bb..91470edf7581 100644 > > > > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > > > > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > > > > @@ -822,6 +822,11 @@ static int sun6i_csi_resource_request(struct > > > > sun6i_csi_dev *sdev, > > > > return PTR_ERR(sdev->clk_mod); > > > > } > > > > > > > > + /* A64 require 300MHz mod clock to operate properly */ > > > > + if (of_device_is_compatible(pdev->dev.of_node, > > > > + "allwinner,sun50i-a64-csi")) > > > > + clk_set_rate_exclusive(sdev->clk_mod, 300000000); > > > > + > > > > > > If you're using clk_set_rate_exclusive, you need to put back the > > > "exclusive" reference once you're not using the clock. > > > > > > Doing it here is not really optimal either, since you'll put a > > > constraint on the system (maintaining that clock at 300MHz), while > > > it's not in use. > > > > I think we can handle via clk_rate_exclusive_put for those errors > > cases? If I'm not wrong > > Yes, but it's not only for the error case, it's also for the inactive > case.
Yes, I will try to add this next version.
