Hi.
This is my attempt at converting the rcpci45 driver (240t13p2) to the new
PCI API interface. I fully expect to have missed something so please
comment away. BTW, I do not consider this the final version of this patch;
therefore the maintainers are not explicitly on the recipients lists.
There are some other cleanups I want to do, and I need to make my indentation
match the drivers, but that will be after the basic conversion is done.
--- linux-240-t13-pre1-clean/drivers/net/rcpci45.c Sat Nov 4 23:27:08 2000
+++ linux/drivers/net/rcpci45.c Thu Dec 14 21:41:17 2000
@@ -36,6 +36,8 @@
** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
**
+** Rasmus Andersen, December 2000: Converted to new PCI API.
+**
** Pete Popov, January 11,99: Fixed a couple of 2.1.x problems
** (virt_to_bus() not called), tested it under 2.2pre5 (as a module), and
** added a #define(s) to enable the use of the same file for both, the 2.0.x
@@ -47,10 +49,6 @@
**
***************************************************************************/
-static char *version =
-"RedCreek Communications PCI linux driver version 2.02\n";
-
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -75,6 +73,9 @@
#include <linux/skbuff.h>
+static char version[] __initdata =
+"RedCreek Communications PCI linux driver version 2.03\n";
+
#define RC_LINUX_MODULE
#include "rclanmtl.h"
#include "rcif.h"
@@ -123,7 +124,6 @@
U32 function;
struct timer_list timer; /* timer */
struct net_device_stats stats; /* the statistics structure */
- struct net_device *next; /* points to the next RC adapter */
unsigned long numOutRcvBuffers;/* number of outstanding receive buffers*/
unsigned char shutdown;
unsigned char reboot;
@@ -138,8 +138,6 @@
static PDPA PCIAdapters[MAX_ADAPTERS];
static int RCinit(struct net_device *dev);
-static int RCscan(void);
-static int RCfound_device(int, int, int, int, int, int);
static int RCopen(struct net_device *);
static int RC_xmit_packet(struct sk_buff *, struct net_device *);
@@ -155,71 +153,29 @@
static int RC_allocate_and_post_buffers(struct net_device *, int);
-/* A list of all installed RC devices, for removing the driver module. */
-static struct net_device *root_RCdev;
+static struct pci_device_id rcpci45_pci_table[] __devinitdata = {
+ { RC_PCI45_VENDOR_ID, RC_PCI45_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, rcpci_pci_table);
-static int __init rcpci_init_module (void)
+static void rcpci45_remove_one(struct pci_dev *pdev)
{
- int cards_found;
-
- cards_found = RCscan();
- if (cards_found)
- printk(version);
- return cards_found ? 0 : -ENODEV;
-}
+ struct net_device *dev = pdev->driver_data;
+ PDPA pDpa = dev->priv;
-static int RCscan(void)
-{
- int cards_found = 0;
- static int pci_index;
-
- if (!pcibios_present())
- return cards_found;
-
- for (;pci_index < 0x8; pci_index++)
- {
- unsigned char pci_bus, pci_device_fn;
- int scan_status;
- int board_index = 0;
- unsigned char pci_irq_line;
- unsigned int pci_ioaddr;
- struct pci_dev *pdev;
-
- scan_status =
- (pcibios_find_device (RC_PCI45_VENDOR_ID,
- RC_PCI45_DEVICE_ID,
- pci_index,
- &pci_bus,
- &pci_device_fn));
-#ifdef RCDEBUG
- printk("rc scan_status = 0x%X\n", scan_status);
-#endif
- if (scan_status != PCIBIOS_SUCCESSFUL ||
- !((pdev = pci_find_slot(pci_bus, pci_device_fn))))
- break;
- pci_irq_line = pdev->irq;
- pci_ioaddr = pci_resource_start (pdev, 0);
+ if (!dev) {
+ printk (KERN_ERR "remove non-existent device\n");
+ return;
+ }
-#ifdef RCDEBUG
- printk("rc: Found RedCreek PCI adapter\n");
- printk("rc: pci_bus = %d, pci_device_fn = %d\n", pci_bus, pci_device_fn);
- printk("rc: pci_irq_line = 0x%x \n", pci_irq_line);
- printk("rc: pci_ioaddr = 0x%x\n", pci_ioaddr);
-#endif
+ printk("IOP reset: 0x%x\n", RCResetIOP(pDpa->id));
- if (pci_enable_device(pdev))
- break;
- pci_set_master(pdev);
+ unregister_netdev(dev);
+ iounmap((void *)dev->base_addr);
+ free_irq(dev->irq, dev);
- if (!RCfound_device(pci_ioaddr, pci_irq_line,
- pci_bus, pci_device_fn,
- board_index++, cards_found))
- cards_found++;
- }
-#ifdef RCDEBUG
- printk("rc: found %d cards \n", cards_found);
-#endif
- return cards_found;
+ kfree(dev);
}
static int RCinit(struct net_device *dev)
@@ -233,17 +189,22 @@
return 0;
}
-static int
-RCfound_device(int memaddr, int irq,
- int bus, int function, int product_index, int card_idx)
+static int rcpci45_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
int dev_size = 32768;
unsigned long *vaddr=0;
PDPA pDpa;
int init_status;
+ long memaddr = pci_resource_start(pdev, 0);
+ int card_idx;
struct net_device *dev;
-
+
+ static int card_counter = 0;
+
+ card_idx = card_counter++; /* Yeah, icky hack. */
+
/*
* Allocate and fill new device structure.
* We need enough for struct net_device plus DPA plus the LAN API private
@@ -256,10 +217,13 @@
dev = (struct net_device *) kmalloc(dev_size, GFP_DMA | GFP_KERNEL |GFP_ATOMIC);
if (!dev)
{
- printk("rc: unable to kmalloc dev\n");
+ printk("rcpci45 driver: unable to kmalloc dev struct\n");
return 1;
}
memset(dev, 0, dev_size);
+
+ pdev->driver_data = dev;
+
/*
* dev->priv will point to the start of DPA.
*/
@@ -268,15 +232,16 @@
#ifdef RCDEBUG
printk("rc: dev = 0x%x, dev->priv = 0x%x\n", (uint)dev, (uint)dev->priv);
#endif
-
+
pDpa = dev->priv;
pDpa->dev = dev; /* this is just for easy reference */
- pDpa->function = function;
- pDpa->bus = bus;
+ pDpa->function = pdev->devfn;
+ pDpa->bus = (unsigned char)pdev->bus->number;
pDpa->id = card_idx; /* the device number */
pDpa->pci_addr = memaddr;
PCIAdapters[card_idx] = pDpa;
+
#ifdef RCDEBUG
printk("rc: pDpa = 0x%x, id = %d \n", (uint)pDpa, (uint)pDpa->id);
#endif
@@ -300,7 +265,7 @@
(uint)dev, (uint)dev->priv, (uint)vaddr);
#endif
dev->base_addr = (unsigned long)vaddr;
- dev->irq = irq;
+ dev->irq = pdev->irq;
/*
* Request a shared interrupt line.
@@ -342,9 +307,6 @@
dev->init = &RCinit;
ether_setup(dev); /* linux kernel interface */
- pDpa->next = root_RCdev;
- root_RCdev = dev;
-
if (register_netdev(dev) != 0) /* linux kernel interface */
{
printk("rc: unable to register device \n");
@@ -359,6 +321,22 @@
return 0; /* success */
}
+static struct pci_driver rcpci45_driver = {
+ name: "rcpci45",
+ id_table: rcpci45_pci_table,
+ probe: rcpci45_init_one,
+ remove: rcpci45_remove_one,
+};
+
+static int __init rcpci_init_module (void)
+{
+ int rc = pci_module_init(&rcpci45_driver);
+
+ if (!rc)
+ printk(version);
+ return rc;
+}
+
static int
RCopen(struct net_device *dev)
{
@@ -1185,31 +1163,7 @@
static void __exit rcpci_cleanup_module (void)
{
- PDPA pDpa;
- struct net_device *next;
-
-
-#ifdef RCDEBUG
- printk("rc: RC cleanup_module\n");
- printk("rc: root_RCdev = 0x%x\n", (uint)root_RCdev);
-#endif
-
-
- while (root_RCdev)
- {
- pDpa = (PDPA) root_RCdev->priv;
-#ifdef RCDEBUG
- printk("rc: cleanup 0x%08X\n", (uint)root_RCdev);
-#endif
- printk("IOP reset: 0x%x\n", RCResetIOP(pDpa->id));
- unregister_netdev(root_RCdev);
- next = pDpa->next;
-
- iounmap((unsigned long *)root_RCdev->base_addr);
- free_irq( root_RCdev->irq, root_RCdev );
- kfree(root_RCdev);
- root_RCdev = next;
- }
+ pci_unregister_driver(&rcpci45_driver);
}
module_init(rcpci_init_module);
--
Regards,
Rasmus([EMAIL PROTECTED])
If a man says something in a forest and there are no women around to
hear him, is he still wrong? -- Anonymous
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
