Currently, AXP803 driver assumes that reg_drivevbus is input which is
wrong. Unfortunate consequence of that is that none of the USB ports
work on the board, even USB HOST port, because USB PHY driver probing
fails due to missing regulator.
Fix that by adding "x-powers,drive-vbus-en" property to AXP803 node.
Fixes: 14ff5d8f9151 ("arm64: dts: allwinner: a64: Orange Pi Win: Enable USB OTG
socket")
Cc: sta...@vger.kernel.org
Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index b0c64f75792c..8974b5a1d3b1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -188,6 +188,7 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
--
2.20.1
