From: John Hubbard <[email protected]>
Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.
Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.
Fix the build by:
1) Renaming Marvell's defined value to a more scoped name,
in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.
2) Adding the missing enum, which was going to be added anyway as part
of [1].
[1] https://lkml.kernel.org/r/[email protected]
Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework")
Cc: Grzegorz Jaszczyk <[email protected]>
Cc: Miquel Raynal <[email protected]>
Cc: Hans de Goede <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
---
drivers/phy/marvell/phy-berlin-sata.c | 5 +++--
include/linux/phy/phy.h | 1 +
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/marvell/phy-berlin-sata.c
b/drivers/phy/marvell/phy-berlin-sata.c
index a91fc67fc4e0..d70ba9bc42d9 100644
--- a/drivers/phy/marvell/phy-berlin-sata.c
+++ b/drivers/phy/marvell/phy-berlin-sata.c
@@ -32,7 +32,7 @@
/* register 0x01 */
#define REF_FREF_SEL_25 BIT(0)
-#define PHY_MODE_SATA (0x0 << 5)
+#define PHY_BERLIN_MODE_SATA (0x0 << 5)
/* register 0x02 */
#define USE_MAX_PLL_RATE BIT(12)
@@ -102,7 +102,8 @@ static int phy_berlin_sata_power_on(struct phy *phy)
/* set PHY mode and ref freq to 25 MHz */
phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01,
- 0x00ff, REF_FREF_SEL_25 | PHY_MODE_SATA);
+ 0x00ff,
+ REF_FREF_SEL_25 | PHY_BERLIN_MODE_SATA);
/* set PHY up to 6 Gbps */
phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25,
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e8e118d70fd7..3f350e2749fe 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -42,6 +42,7 @@ enum phy_mode {
PHY_MODE_PCIE,
PHY_MODE_ETHERNET,
PHY_MODE_MIPI_DPHY,
+ PHY_MODE_SATA
};
/**
--
2.20.1
