[PATCH] spi: omap2-mcspi: Fix DMA and FIFO event trigger size mismatch

[Vignesh R]

Commit b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word 
length")
broke SPI transfers where bits_per_word != 8. This is because of
mimsatch between McSPI FIFO level event trigger size (SPI word length) and
DMA request size(word length * maxburst). This leads to data
corruption, lockup and errors like:

        spi1.0: EOW timed out

Fix this by setting DMA maxburst size to 1 so that
McSPI FIFO level event trigger size matches DMA request size.

Fixes: b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word 
length")
Cc: sta...@vger.kernel.org
Reported-by: David Lechner <da...@lechnology.com>
Tested-by: David Lechner <da...@lechnology.com>
Signed-off-by: Vignesh R <vigne...@ti.com>
---
 drivers/spi/spi-omap2-mcspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 2fd8881fcd65..8be304379628 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -623,8 +623,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct 
spi_transfer *xfer)
        cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
        cfg.src_addr_width = width;
        cfg.dst_addr_width = width;
-       cfg.src_maxburst = es;
-       cfg.dst_maxburst = es;
+       cfg.src_maxburst = 1;
+       cfg.dst_maxburst = 1;
 
        rx = xfer->rx_buf;
        tx = xfer->tx_buf;
-- 
2.20.1